SR48UBDP Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 48U SmartRack DEEP Premium Enclosure includes doors and side panels

48U SmartRack DEEP Premium Enclosure includes
doors and side panels
MODEL NUMBER: SR48UBDP
Description
A DEEP version of our standard 48U SmartRack. This enclosure is 1200mm deep (48") compared to the
standard 1050mm deep (42"). This extra depth allows for high density equipment installations. It allows extra
space for moving the cable management back as well as providing space for mounted equipment that has
hot-swap, removable power supplies out the back of the enclosure.
The SR48UBDP houses 3000 lb of standard 19-inch rack equipment in 48U. Its front and rear pairs of vertical
rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 42 inches. Adjustment
is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming
measurements. Each rack space within the enclosure is numbered for ready reference.
Highlights
48" (1200mm) depth for
mounting extra-deep equipment
Standard 24" (600mm) width for
optimizing floor space
Ships fully assembled
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors; Locking,
removable side panels keyed
alike with doors
Pre-installed casters and leveling
feet; Rolls through standard 7
foot doorway
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Package Includes
SR48UBDP Rack Enclosure
(4) Side panels
(4) Side panel locks
(2) Door & side panel keys
(50) M6 screws
(50) M6 cage nuts
(50) M6 washers
Owner's Manual
Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four
compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.
With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR48UBDP provides ultimate equipment safety. The side
panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a wall. The SR48UBDP meets
all requirements toward PCI DSS compliance.
The top panel of the SR48UBDP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for
cable routing, and can be quickly removed without tools. To facilitate cable access, the SR48UBDP is open-bottom.
All components of the SR48UBDP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility
earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR48UBDP comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be
secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure
1/3