SR48UB Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 48U SmartRack Standard-Depth Rack Enclosure Cabinet with doors and side panels

48U SmartRack Standard-Depth Rack Enclosure
Cabinet with doors & side panels
Highlights
48U SmartRack enclosure with
doors and side panels
MODEL NUMBER: SR48UB
4 interior vertical posts with
unthreaded square hole openings
Standard 24" width for optimizing
floor space
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Preinstalled casters and leveling
feet
Description
Includes 50 pieces of M6 cage
SmartRack enclosures are designed for secure, high density server and networking applications in IT
nuts and 50 pieces of M6 screws
environments. Designed with provisions to integrate cooling, power distribution and cable management,
(equipment mounting hardware)
SmartRack enclosures make ideal homes for mission-critical equipment. Vendor-neutral square hole/cage nut
Meets all enclosure requirements
mounting for guaranteed compatibility with all EIA-310-D compliant 19" equipment. Enclosures ship fully
towards PCI DSS (Payment Card
assembled for rapid deployment and roll into place on heavy-duty casters. Toolless mounting slots allow quick
Industry Data Security Standard)
installation of PDUs and vertical cable managers. Adjustable mounting rails include an easy-view depth index to
Compliance
eliminate time-consuming measurements. Lightweight modular doors and side panels provide safe, convenient
service access. Integrated baying tabs facilitate combining enclosures in rows for standard data center baying
applications. SmartRack enclosures hold up to 3000 lbs and support cooling, cable management, power
distribution and monitoring features that keep critical servers and network equipment operating nonstop.
Perforated doors permit massive front to rear airflow that exceeds servers manufacturer requirements.
Enclosures are fully compatible with hot-aisle/cold-aisle data center configurations.
Package Includes
SR48UB Smart Rack Enclosure
(4) Side panels
(4) Side panel locks
(2) Door & side panel keys
(50) M6 screws
Features
(50) M6 cage nuts
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.
(50) M6 washers
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and
Owner's Manual
convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming
measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting
slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable
managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
1/3