SR45UBWDVRT Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 45U SmartRack Standard-Depth Rack Enclosure Cabinet, Pre-Installed SRCABLEVRT3 with sides and doors

45U SmartRack Standard-Depth Rack Enclosure
Cabinet, Pre-Installed SRCABLEVRT3 with sides &
doors
MODEL NUMBER: SR45UBWDVRT
Description
SR45UBWDVRT is a WIDE version of our standard 45U SmartRack Enclosure (750mm wide compared to the
standard 600mm wide) and includes preinstalled SRCABLEVRT3. The SRCABLEVRT3 helps eliminate cable
stress by organizing the cables within the enclosure. The vertical cable manager is 6-ft high and 3" wide.
The SR45UBWDVRT houses 3000lbs of standard 19-inch rack equipment in 45U. Its front and rear pairs of
vertical rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 37 inches.
Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring
time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.
With its locking, reversible, removable front and rear doors and locking, removable side panels, the
SR45UBWDVRT provides ultimate equipment safety. The side panels are half size for ease of removal and
re-installation. The split rear door design allows the enclosure to be placed closer to a wall. The SR45UBWDVRT
meets all requirements toward PCI DSS compliance.
Highlights
45U SmartRack enclosure with
doors and side panels
30" (750mm) width and 42"
(1050mm) depth
Pre-Installed 6-ft vertical cable
manager - high capacity for large
cable bundles
4 interior vertical posts with
unthreaded square hole openings
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Package Includes
SR45UBWDVRT Rack Enclosure
(4) side panels
(4) side panel locks
(2) door & side panel keys
(50) M6 screws
(50) M6 washers
(50) M6 cage nuts
Owner's Manual
The top panel of the SR45UBWDVRT is vented to help remove warm air from the enclosure and draw in cool air by convection. the top panel includes ports for
cable routing, and can be quickly removed without tools.
All components of the SR45UBWDVRT are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the
facility earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR45UBWDVRT comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be
secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving enclosures over
long distances.
1/3