SR45UBSD Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 45U SmartRack Shallow-Depth Rack Enclosure Cabinet with doors and side panels

45U SmartRack Shallow-Depth Rack Enclosure
Cabinet with doors & side panels
MODEL NUMBER: SR45UBSD
Description
The shallow depth of the SR45UBSD is an ideal cabinet for shallow-depth audio/video equipment, smaller
equipment installs or areas with limited floor space. It houses 3000 lb of standard 19-inch rack equipment in 45U.
Its front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments
from 4 to 27 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without
requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.
Two of the adjustable vertical mounting rails support tool-less button-mount 0U installation of up to four
compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and
reduces cord clutter.
With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR45UBSD
provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split
rear door design allows the enclosure to be placed closer to a wall. The SR45UBSD meets all requirements
toward PCI DSS compliance.
Highlights
Ideal for shallow depth A/V
equipment or any venue with
limited floorspace
32" (825mm) depth (with
mounting depth increments of 4
to 27") and standard 24"
(600mm) width
Ships fully assembled
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors; Locking,
removable side panels keyed
alike with doors
Preinstalled casters and leveling
feet
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Package Includes
SR45UBSD Rack Enclosure
(4) Side panels
(4) Side panel locks
(2) Door & side panel keys
(50) M6 screws
(50) M6 cage nuts
(50) M6 washers
Owner's Manual
The top panel of the SR45UBSD is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for
cable routing, and can be quickly removed without tools. To facilitate cable access, the SR45UBSD is open-bottom.
All components of the SR45UBSD are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility
earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR45UBSD comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be
secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure
over long distances.
1/3