SR45UBMD Datasheet, PDF (1/4 Pages) Tripp Lite. All Rights Reserved – 45U SmartRack Mid-Depth Rack Enclosure Cabinet with doors and side panels

45U SmartRack Mid-Depth Rack Enclosure Cabinet
with doors & side panels
MODEL NUMBER: SR45UBMD
Description
The SR45UBMD is part of our new line of mid-depth rack enclosures. It features a massive front-to
rear-ventilation capacity that meets or exceeds server manufacturer requirements. Its integrated baying tabs
make it easy to combine multiple enclosures in rows for data center applications. This enclosure is also
compatible with hot-aisle/cold-aisle configurations.
The SR45UBMD houses 3000 lb of standard 19-inch rack equipment in 45U. Its front and rear pairs of vertical
rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 31 inches. Adjustment
is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming
measurements. Each rack space within the enclosure is numbered for ready reference.
Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four
compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and
reduces cord clutter.
With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR45UBMD
provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split
rear door design allows the enclosure to be placed closer to a wall. The SR45UBMD meets all requirements
toward PCI DSS compliance.
Highlights
45U SmartRack enclosure with
doors and side panels
36" (927mm) depth (with
mounting depth increments from
4 to 31") and standard 24"
(600mm) width
4 interior vertical posts with
unthreaded square hole openings
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Pre-installed casters and leveling
feet
Includes 50 pieces of M6 cage
nuts and 50 pieces of M6 screws
(equipment mounting hardware)
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Package Includes
SR45UBMD Rack Enclosure
(4) side panels
(4) side panel locks
(2) door & side panel keys
(50) M6 screws
(50) M6 washers
(50) M6 cage nuts
Owner's Manual
The top panel of the SR45UBMD is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for
cable routing, and can be quickly removed without tools. To facilitate cable access, the SR45UBMD is open-bottom.
All components of the SR45UBMD are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility
earth ground. The removable front and rear doors feature quick-release ground wires.
1/4