SR45UBDP Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 45U SmartRack Deep Rack Enclosure Cabinet with doors and side panels

45U SmartRack Deep Rack Enclosure Cabinet with
doors & side panels
Highlights
Standard 24" (600mm) width for
optimizing floor space
MODEL NUMBER: SR45UBDP
48" (1200mm) depth for extra
space need for mounting deep
equipment
Ships fully assembled
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors; Locking,
removable side panels keyed
alike with doors
Pre-installed casters and leveling
feet
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Description
Compliance
The SR45UBDP is a DEEP version of our standard 45U SmartRack. This enclosure is 1200mm deep (48")
compared to the standard 1050mm deep (42"). This extra depth allows for high density equipment installations. It
allows extra space for moving the cable management back as well as providing space for mounted equipment
that has hot-swap, removable power supplies out the back of the enclosure.
Package Includes
SR45UBDP Rack Enclosure
(4) Side panels
(4) Side panel locks
The SR45UBDP features a massive front-to rear-ventilation capacity that meets or exceeds server manufacturer
requirements. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center
applications. This enclosure is also compatible with hot-aisle/cold-aisle configurations.
(2) Door & side panel keys
(50) M6 screws
(50) M6 cage nuts
(50) M6 washers
With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR45UBDP
Owner's Manual
provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split
rear door design allows the enclosure to be placed closer to a wall. The SR45UBDP meets all requirements toward PCI DSS compliance.
The top panel of the SR45UBDP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for
cable routing, and can be quickly removed without tools. To facilitate cable access, the SR45UBDP is open-bottom.
All components of the SR45UBDP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility
earth ground. The removable front and rear doors feature quick-release ground wires.
It houses 3000 lb of standard 19-inch rack equipment in 45U. To simplify deployment, the SR45UBDP comes with preinstalled casters that enable it to be
easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position
adjustments and are not designed for moving the enclosure over long distances.
The SR45UBDP comes with a 5-year product warranty. As part of the SmartRack family, the SR45UBDP is compatible with Tripp Lite’s extensive range of
rackmount accessories, enabling you to customize your solution to meet any requirement.
1/3