SR42UWEXP Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 42U SmartRack White Standard-Depth Rack Enclosure - side panels not included

42U SmartRack White Standard-Depth Rack
Enclosure - side panels not included
Highlights
42U White SmartRack enclosure
with doors and NO side panels.
MODEL NUMBER: SR42UWEXP
'EXP' version is an expansion
model for when several cabinets
are bayed together
4 interior vertical posts with
unthreaded square hole openings
Standard 24" (600mm) width and
42" (1050mm) depth for
optimizing floor space
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Description
Rolls through standard 7 foot
The SR42UWEXP is an expansion model used when several cabinets are bayed together. It has doors and a
doorway
roof but no side panels. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data
center application. The SR42UWEXP is also compatible with hot aisle/cold aisle configurations.
Package Includes
SR42UWEXP
The SR42UWEXP houses 3000lbs of standard 19-inch rack equipment in 42U. Offers vendor-neutral square
hole/cage nut mounting for guaranteed compatibility with all EIA-310-E compliant 19" equipment. Its front and
rear pairs of vertical rails are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and
Keys
Mounting Hardware
Owners Manual
an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.
Each rack space within the enclosure is numbered for ready reference. Two of these adjustable vertical mounting rails support toolless button-mount 0U
installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.
The top panel of the SR42UWEXP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for
cable routing, and can be quickly removed without tools. To facilitate cable access, the SR42UWEXP is open-bottom.
All components of the SR42UWEXP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility
earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR42UWEXP comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be
secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure
over long distances.
Features
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters (casters are removable)
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures
consistent rail placement without requiring time-consuming measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting
1/3