SR42UBWDVRT Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 42U SmartRack Wide Standard-Depth Rack Enclosure Cabinet with Pre-Installed SRCABLEVRT3 with sides and doors

42U SmartRack Wide Standard-Depth Rack
Enclosure Cabinet with Pre-Installed
SRCABLEVRT3 with sides & doors
Highlights
30" (750mm) wide and 42"
(1050mm) deep enclosure with
doors and side panels
MODEL NUMBER: SR42UBWDVRT
Pre-Installed 6-ft vertical cable
manager - high capacity for large
cable bundles
4 interior vertical posts with
unthreaded square hole openings
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Meets all enclosure requirements
towards PCI DSS (Payment Card
Description
SR42UBWDVRT is a WIDE version of our standard 42U SmartRack Enclosure (750mm wide compared to the
Industry Data Security Standard)
Compliance
standard 600mm wide) and includes preinstalled SRCABLEVRT3. The SRCABLEVRT3 helps eliminate cable
stress by organizing the cables within the enclosure. The vertical cable manager is 6-ft high and 3" wide.
Package Includes
SR42UBWDVRT Rack Enclosure
The SR42UBWDVRT houses 3000lbs of standard 19-inch rack equipment in 42U. Its front and rear pairs of
vertical rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 37 inches.
Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring
time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.
(4) side panels
(4) side panel locks
(2) door & side panel keys
(50) M6 screws
(50) M6 washers
With its locking, reversible, removable front and rear doors and locking, removable side panels, the
SR42UBWDVRT provides ultimate equipment safety. The side panels are half size for ease of removal and
(50) M6 cage nuts
Owner's Manual
re-installation. The split rear door design allows the enclosure to be placed closer to a wall. The SR42UBWDVRT meets all requirements toward PCI DSS
compliance.
The top panel of the SR42UBWDVRT is vented to help remove warm air from the enclosure and draw in cool air by convection. the top panel includes ports for
cable routing, and can be quickly removed without tools.
All components of the SR42UBWDVRT are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the
facility earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR42UBWDVRT comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be
secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving enclosures over
long distances.
1/3