SR42UBWDTAA Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – TAA-Compliant 42U SmartRack Wide

TAA-Compliant 42U SmartRack Wide
Standard-Depth Rack Enclosure Cabinet with doors
& side panels
MODEL NUMBER: SR42UBWDTAA
Description
A WIDE version of our standard 42U SmartRack. This enclosure is 750mm wide (29.5") compared to the
standard 600mm wide (23.6"). This extra width allows for high density equipment installations. It allows cable
management and PDU mounting off to the sides of the rack in order to keep these items out of the airflow for
proper cooling. All features from the standard SmartRacks carry over to these wide racks to allow cross usage of
accessories.
Highlights
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Schedule purchases
42U SmartRack enclosure with
doors and side panels
4 interior vertical posts with
unthreaded square hole openings
30" (750mm) width for optimizing
airflow through cabinet
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Features
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures
consistent rail placement without requiring time-consuming measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting
slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable
managers side-by-side (four items per enclosure).
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
Front door is locking, reversible and removable.
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer
to a wall.
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4
panels total). Side panels are keyed alike to the front and rear doors.
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 750mm or 30".
Casters are pre-installed and support a rolling load capacity of 2250 lbs, allowing the enclosures to be pre-configured and rolled to the final installation
1/3