SR42UBWD Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 42U SmartRack Standard-Depth Rack Enclosure Cabinet with doors and side panels

42U SmartRack Standard-Depth Rack Enclosure
Cabinet with doors & side panels
MODEL NUMBER: SR42UBWD
Description
A WIDE version of our standard 42U SmartRack. This enclosure is 750mm wide (30") compared to the standard
600mm wide (24"). This extra width allows for high density equipment installations. It allows cable management
and PDU mounting off to the sides of the rack in order to keep these items out of the airflow for proper cooling.
All features from the standard SmartRacks carry over to these wide racks to allow cross usage of accessories.
Highlights
42U SmartRack enclosure with
doors and side panels
4 interior vertical posts with
unthreaded square hole openings
30" (750mm) width for optimizing
airflow through cabinet
Standard 42" (1050mm) depth
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Rolls through standard 7 foot
doorway
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
Features
Package Includes
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.
SR42UBWD Rack Enclosure
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and
(4) Side panels
convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming
(4) Side panel locks
measurements.
(2) Door & side panel keys
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible
(50) M6 screws
PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible
(50) M6 cage nuts
with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers
(50) M6 washers
side-by-side (four items per enclosure).
Owner's Manual
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
Front door is locking, reversible and removable.
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer
to a wall.
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4
panels total). Side panels are keyed alike to the front and rear doors.
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 750mm or 30".
Casters are pre-installed and support a rolling load capacity of 2250 lbs, allowing the enclosures to be pre-configured and rolled to the final installation
1/3