SR42UBTAA Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – TAA-Compliant 42U SmartRack Standard-Depth Rack Enclosure Cabinet with doors and side panels

TAA-Compliant 42U SmartRack Standard-Depth
Rack Enclosure Cabinet with doors & side panels
MODEL NUMBER: SR42UBTAA
Description
SR42UBTAA meets the requirements of the Trade Agreements Act (TAA). TAA compliance applies to GSA
Schedule and IDIQ contract purchases, and requires that products be assembled within the United States or in
an approved country.
The SR42UBTAA features a massive front-to rear-ventilation capacity that meets or exceeds server
manufacturer requirements. Its integrated baying tabs make it easy to combine multiple enclosures in rows for
data center applications. This enclosure is also compatible with hot-aisle/cold-aisle configurations.
Highlights
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Schedule purchases
42U SmartRack enclosure with
doors and side panels
4 interior vertical posts with
unthreaded square hole openings
Standard 24" (600mm) width and
42" (1050mm) depth for
optimizing floor space
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Meets all enclosure requirements
towards PCI DSS (Payment Card
Industry Data Security Standard)
Compliance
The SR42UBTAA houses 3000 lb of standard 19-inch rack equipment in 42U. Its front and rear pairs of vertical rails have square mounting holes that are
adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without
requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.
Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature
makes it easier to route cabling to rack equipment and reduces cord clutter.
With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR42UBTAA provides ultimate equipment safety. The side
panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a wall. The SR42UBTAA
meets all requirements toward PCI DSS compliance.
The top panel of the SR42UBTAA is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for
cable routing, and can be quickly removed without tools. To facilitate cable access, the SR42UB is open-bottom.
All components of the SR42UBTAA are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility
earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR42UBTAA comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be
1/3