SR42UBMDEXPND Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 42U SmartRack 4-Post Mid-Depth Open Frame Rack

42U SmartRack 4-Post Mid-Depth Open Frame Rack
- no sides or doors
MODEL NUMBER: SR42UBMDEXPND
Description
The SR42UBMDEXPND is part of our new line of mid-depth rack enclosures. Our new line offers 36" (927mm)
depth opposed to the standard 42" (1050mm).
Highlights
42U SmartRack Premium open
frame rack
36" (927mm) depth (with
mounting depth increments from
4 to 31") and standard 24"
(600mm) width
4 interior vertical posts with
unthreaded square hole openings
Ships fully assembled
3000 lb stationary / 2250 lb rolling
load capacity
Preinstalled casters and leveling
feet
Rolls through standard 7 foot
doorways
Includes 50 pieces of M6 cage
nuts and 50 pieces of M6 screws
(equipment mounting hardware)
The SR42UBMDEXPND is a 42U SmartRack enclosure with NO doors and NO side panels. The 'EXP' version is an expansion model used when several
cabinets are bayed together. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center applications. This enclosure is also
compatible with hot-aisle/cold-aisle configurations.
The SR42UBMDEXPND houses 3000 lb of standard 19-inch rack equipment in 42U. Its front and rear pairs of vertical rails have square mounting holes that
are adjustable in quarter-inch increments from 4 to 31 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without
requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.
Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature
makes it easier to route cabling to rack equipment and reduces cord clutter.
All components of the SR42UBMDEXPND are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the
facility earth ground.
To simplify deployment, the SR42UBMDEXPND comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can
be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure
over long distances.
The SR42UBMDEXPND comes with a 5-year product warranty. As part of the SmartRack family, the SR42UBMDEXPND is compatible with Tripp Lite’s
extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement.
Features
Ships fully assembled for rapid deployment and roll into place on pre-installed casters, allowing the enclosures to be pre-configured and rolled to the final
1/3