SR42UBKD Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 42U SmartRack Knock-Down Standard-Depth Rack Enclosure Cabinet Kit

42U SmartRack Knock-Down Standard-Depth Rack
Enclosure Cabinet Kit
Highlights
Ships unassembled for easy
transport and assembly in
MODEL NUMBER: SR42UBKD
confined spaces. Once
assembled, it is identical to the
standard SR42UB enclosure.
Standard 24" width for optimizing
floor space
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Locking, removable side panels
keyed alike with doors
Pre-installed casters and leveling
feet; Rolls through standard 7
foot doorway
Meets all enclosure requirements
Description
towards PCI DSS (Payment Card
SmartRack enclosures are designed for secure, high density server and networking applications in IT
environments. Designed with provisions to integrate cooling, power distribution and cable management,
Industry Data Security Standard)
Compliance
SmartRack enclosures make ideal homes for mission-critical equipment. Vendor-neutral square hole/cage nut
mounting for guaranteed compatibility with all EIA-310-D compliant 19" equipment. Tool-less mounting slots allow quick installation of PDUs and vertical cable
managers. Adjustable mounting rails include an easy-view depth index to eliminate time-consuming measurements. Lightweight modular doors and side
panels provide safe, convenient service access. Integrated baying tabs facilitate combining enclosures in rows for standard data center baying applications.
SmartRack enclosures hold up to 3000 lbs and support cooling, cable management, power distribution and monitoring features that keep critical servers and
network equipment operating nonstop. Perforated doors permit massive front to rear airflow that exceeds servers manufacturer requirements. Enclosures are
fully compatible with hot-aisle / cold-aisle data center configurations.
Features
Ships unassembled for easy transport and assembly in confined spaces.
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures
consistent rail placement without requiring time-consuming measurements.
Tool-less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting
slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable
managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
Front door is locking, reversible and removable.
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer
to a wall.
1/3