SR42UBCL Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 42U SmartRack Co-Location Standard-Depth Rack Enclosure Cabinet - 2 separate compartments

42U SmartRack Co-Location Standard-Depth Rack
Enclosure Cabinet - 2 separate compartments
Highlights
Two compartment co-location
rack with doors and side panels
MODEL NUMBER: SR42UBCL
4 interior vertical posts with
unthreaded square hole openings
Standard 24" width for optimizing
floor space
Ships fully assembled
Massive front to rear ventilation
capacity
3000 lb stationary / 2250 lb rolling
load capacity
Locking, removable, reversible
front and rear doors
Combination lock, with key
override standard on all doors
Locking, removable side panels
keyed alike with doors
Description
Meets all enclosure requirements
Multi compartment enclosure allows two different users 20U spaces each all in the same footprint of a standard
towards PCI DSS (Payment Card
enclosure. Each compartment has its own front and rear access doors with combo locks as standard. There is a
Industry Data Security Standard)
divider panel within the rack that separates the two compartments. This allows the facility manager to have
Compliance
access to each compartment, but each compartment has a unique combo code. All features from the standard
SmartRacks carry over to these colo racks. In fact, they are all built off the same platform to allow cross usage of accessories.
Features
Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures
consistent rail placement without requiring time-consuming measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting
slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable
managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
Front door is locking, reversible and removable.
Rear doors are locking and reversible.
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4
panels total). Side panels are keyed alike to the front and rear doors.
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center
floor tiles.
Casters are pre-installed and support a rolling load capacity of 2250 lbs, allowing the enclosures to be pre-configured and rolled to the final installation
location. Casters are removable.
1/3