SMX500RT1U_15 Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 230V 500VA 300W Line-Interactive UPS,SNMP, Webcard, 1U Rack-Tower, USB, DB9 Serial

SmartPro 230V 500VA 300W Line-Interactive UPS,
SNMP, Webcard, 1U Rack/Tower, USB, DB9 Serial
MODEL NUMBER: SMX500RT1U
Highlights
500VA line interactive 1U
rack/tower UPS
230V nominal output during
brownouts to 187V and
overvoltages to 252V
USB, RS232, EPO and optional
SNMP/Web card interface
Front panel status LEDs; 1
switched output load bank
C14 input; 7 C13 outlets; 2 C13
to C14 cables
Package Includes
SMX500RT1U UPS System with
mounting hardware
Two 1.8m IEC320-C13 to C14
load jumper cables
Description
Tripp Lite's SMX500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss,
downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires
only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large
internal batteries offer 14.6 minutes half load runtime and 3.2 minutes at full load. Maintains regulated 230V
nominal output without using battery power during brownouts as low as 187V. 500VA/300 watt power handling
capability is compatible with networking, telecom and other sensitive electronic applications. Includes a total of 7
Cabling for USB & DB9
monitoring and EPO switching
PowerAlert unattended shutdown
and UPS/Power monitoring
software
Warranty information and
instruction manual
IEC C13 outlets (6 UPS with a single outlet that can be individually controlled via software interface to reboot
select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment, and 1 surge-only receptacle. Supports
simultaneous remote monitoring of UPS and site power conditions via built-in USB, DB9 monitoring ports, and SNMP accessory slot. Includes PowerAlert UPS
monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter.
Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation.
Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression
protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.
Features
Tripp Lite SMX500RT1U .5 kVA / 500VA / 300 watt line interactive UPS
1U rack / tower compatible form factor
IEC C14 input; 7 IEC C13 output receptacles
Installed depth of only 11.8 in / 29.8 cm
Large internal batteries offer runtimes of 14.6 minutes at half load (250VA/150 watts) and 3.2 minutes at full load (500VA/300 watts)
Maintains regulated 230V nominal output during brownouts as low as 187V
Includes 6 UPS-supported outlets, with one single-outlet load bank for remote load shedding or rebooting of an individual device
PowerAlert UPS monitoring software enables detailed site power and UPS status updates with support for unattended shutdown of connected systems
as UPS batteries become depleted
Supports detailed monitoring of equipment load levels,self-test data, and utility power condition via built-in RS-232 and USB interfaces
Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces
1/5