SMX5000XLRT3U Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 230V 5kVA 3.75kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard, 3U Rack-Tower, USB, DB9 Serial

SmartPro 230V 5kVA 3.75kW Line-Interactive Sine
Wave UPS, Extended Run, SNMP, Webcard, 3U
Rack/Tower, USB, DB9 Serial
MODEL NUMBER: SMX5000XLRT3U
Highlights
5kVA / 5000VA line interactive
3U rack/tower UPS; Sine wave
output
230V nominal output during
brownouts to 170V and
overvoltages to 282V
USB, Serial, EPO & optional
SNMP/Web card monitoring
options
3U all-in-one chassis; 98%
efficiency
Hardwire input; 8 C13 & 3 C19
outlets
Package Includes
SMX5000XLRT3U UPS system
PowerAlert Software and Cabling
Mounting hardware for 4 post
Description
5000VA line interactive UPS system for server, network and telecommunications equipment. 5kVA UPS with
internal batteries installs in only 3 rack spaces with a depth of only 635mm / 25 inches. High 98% line-power
rackmount installation
Warranty information
Instruction manual
efficiency rating reduces energy consumption and BTU heat output. Expandable battery runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U
(multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs. Uninterruptible Power Supply (UPS) switches to battery-derived AC
output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers voltage boost during brownouts and
voltage reduction during overvoltage conditions to maintain regulated 230v output over an input range of 170-282V. Supports hardwire input. Includes C19 and
C13 output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support communications via USB, DB9 serial and
SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network
interfaces at once. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. 3-stage metered current monitoring
and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount installation accessories included;
2-9USTAND tower kit and 2POSTRMKITWM two post rack mounting accessories available. Field-replaceable, hot-swappable internal batteries and external
battery packs.
Features
5000VA/3750 watt max. output power capacity compatible with International 230V input voltage
3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 635mm / 25in
Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line Interactive Automatic Voltage Regulation (AVR) corrects 230V nominal input from 170 to 282VAC to usable 230V levels without consuming battery
power
AVR circuits boost undervoltages from 170 to 199V by 12% and reduce overvoltages from 245 to 282V by 12%
Network interfaces support simultaneous communications via USB, DB9 serial or contact closure and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number
of additional servers over IP
Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery
1/5