SMX3000XLRT2U Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 230V 3kVA 2.25kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard, 2U Rack-Tower, USB, DB9 Serial

SmartPro 230V 3kVA 2.25kW Line-Interactive Sine
Wave UPS, Extended Run, SNMP, Webcard, 2U
Rack/Tower, USB, DB9 Serial
MODEL NUMBER: SMX3000XLRT2U
Highlights
3kVA / 3000VA / 2700W line
interactive 2U rack/tower UPS;
Sine wave output
230V nominal output during
brownouts to 151V and
overvoltages to 282V
USB, RS232, EPO & optional
SNMP/Web card are available
for simultaneous use
Extended runtime options up to
1600W
Detailed status LEDs; 3 switched
output load banks
C20 inlet; 8 C13 & 1 C19 outlets;
Includes 3 C13 to C14 cables
Package Includes
SMX3000XLRT2U UPS System
Description
Tripp Lite's SMX3000XLRT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data
loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges.
Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 11 minutes half
load runtime and 4 minutes at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U
external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts
and overvoltages from 158 to 278V. 3000VA/2250 watt power handling capability and full time sine wave output
offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes a
PowerAlert software with USB
and DB9 cables
Mounting hardware for 4 post
rackmount applications
Cable for Emergency Power Off
interface
Instruction manual with warranty
information
total of 9 outlets with 3 load banks that are individually switchable via software interface to reboot select equipment on demand or shed less significant loads to
extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9
monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with
optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the
case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status.
Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive
all-black color scheme.
Features
SMX3000XLRT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and
overvoltages, plus network-grade AC surge suppression
3000VA/2250 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive
electronic devices
Supports 2U rackmount installation in 4 post equipment racks, 2 post rackmount installation requires 2POSTRMKITWM, upright tower installation
requires 2-9USTAND accessory
Large internal batteries support a half load of 1500VA for 11 minutes and a full load of 3000VA for 4 minutes
Runtime is further expandable with the addition of external battery packs BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and
1/5