SMX2200XLRT2U Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 230V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard, 2U Rack-Tower, LCD, USB, DB9 Serial

SmartPro 230V 2.2kVA 1.92kW Line-Interactive Sine
Wave UPS, Extended Run, SNMP, Webcard, 2U
Rack/Tower, LCD, USB, DB9 Serial
MODEL NUMBER: SMX2200XLRT2U
Highlights
2.2kVA / 2200VA / 1920W line
interactive 2U rack/tower UPS,
Sine Wave
230V output, Corrects brownouts
and overvoltages from 158V to
278V
0.9 Power Factor, Interactive
LCD interface
Extended runtime options up to
1600W
4 post compatible mounting
accessories
98% line-mode efficiency, 2
switched load banks
USB, RS232, EPO and slot for
SNMPWEBCARD option
230V C20 inlet, 8 C13 outlets
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
Package Includes
SMX2200XLRT2U UPS system
PowerAlert Software with USB,
Serial & EPO cabling
4 post rackmount installation kit
Set of 3 C13/C14 power cables
Instruction manual
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within
milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and
operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant
USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports
enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling.
Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD
display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode
configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 158 to 278V
C20 AC power inlet; 8 C13 output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 11.9 minutes at 50% load (960W) and 5 minutes at 100% load (1920W)
Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT3U (no limit) or BP48V27-2US (no limit) external battery packs (max output
is reduced to 1600w with external battery packs connected)
External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
1/5