SMX1200XLHG Datasheet, PDF (1/4 Pages) Tripp Lite. All Rights Reserved – SmartPro 230V 1000VA 750W CE-IEC 60601-1 Medical-Grade Line-Interactive UPS, Extended Run,Tower, Full Isolation, USB, DB9 Serial

SmartPro 230V 1000VA 750W CE/IEC 60601-1
Medical-Grade Line-Interactive UPS, Extended Run,
Tower, Full Isolation, USB, DB9 Serial
MODEL NUMBER: SMX1200XLHG
Highlights
1000VA / 1kVA line interactive,
extended run tower UPS
Maintains 230V nominal output
over an input range of 155 to
274V
Professional features include
serial port, IEC320 plug & outlets,
built-in isolation transformer
Input: IEC C14 inlet (230V 5A) /
Output: 6 IEC C13 (230V)
Applications
CE/IEC 60601-1 compliant UPS
provides ultimate safety and reliability
for patient point of care solutions,
telemedicine, nurse's stations,
wireless communications systems,
electronic prescribing applications,
Description
medical imaging and mission critical
Tripp Lite's SMX1200XLHG offers medical-grade UPS protection with built-in line-interactive voltage regulation,
expandable battery runtime and intelligent monitoring with unattended shutdown capability. Tested to CE/IEC
equipment. Not recommended for life
support applications
60601-1 standard as medical electrical equipment. Built-in isolation transformer with Faraday shield offers full
line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.
Includes high quality hospital-grade plug and outlets. Resistant to electrostatic discharge. 1000VA power
handling capacity supports computers, inter-networking equipment and other critical loads during commercial
power failures. External battery connector allows configuration for up to several hours of runtime during power
failures by adding one or more external battery packs BP36V15-2U (limit 1), BP36V42-3U (multi-pack
compatible) and BP36V27-2US (multi-pack compatible). Line interactive voltage regulation corrects brownouts
Package Includes
SMX1200XLHG Medical Grade
Tower UPS System
PowerAlert Software and cabling
Warranty information
Instruction manual
as low as 155V and overvoltages as high as 274V back to normal 230V levels, saving battery reserves for use
only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1 USB, 1 DB9) that work with included PowerAlert
Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
Features
Ideal UPS protection for applications in medical patient-care areas where CE/IEC 60601-1 listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all
modes
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs BP36V15-2U (limit 1), BP36V42-3U (multi-pack compatible) and
BP36V27-2US (multi-pack compatible)
Line-interactive voltage regulation corrects brownouts and overvoltages from 155 to 274 volts back to usable 230V output levels, without using battery
power
Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
Resistant to electrostatic discharge
1/4