SMART3000RMOD2U Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 120V 3kVA 2.88kW Line-Interactive Sine Wave UPS, Hot-Swap, Extended Run, SNMP, Webcard, 2U Rack/Tower, USB, DB9 Serial

SmartPro 120V 3kVA 2.88kW Line-Interactive Sine
Wave UPS, Hot-Swap, Extended Run, SNMP,
Webcard, 2U Rack/Tower, USB, DB9 Serial
MODEL NUMBER: SMART3000RMOD2U
Description
3000VA / 3kVA 120V modular line interactive 2U rack / tower UPS for networks offers complete network-grade
power protection with full support for hot-replacement of separate internal battery and electronics modules. High
.96 power factor supports loads up to 2880 watts. High efficiency rating of 95% reduces electrical operating cost
and BTU emissions. Offers selectable 110/120/127V 50/60Hz operation. Maintains battery derived sine wave AC
output during power failures. Line-interactive dual-boost, single cut automatic voltage regulation (AVR) provides
regulated 110/120/127V nominal output during brownouts and overvoltages. Includes NEMA L5-30P input plug
and 7 UPS-supported output receptacles (6 x 5-15R, 1 x L5-30R). Includes two individually controllable load
banks, for advanced remote-reboot and load-shedding applications. Network-grade AC surge and noise
suppression. Network management interfaces support simultaneous communications via USB, DB9 serial and
card slot for optional SNMPWEBCARD and other card accessories. HID-compliant USB interface enables
integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports
detailed monitoring of equipment load levels, self-test data and utility power conditions via all three network
interfaces at once. Advanced LED indicators offer 5-stage metering of UPS load and battery charge levels, plus
single-LED status indicators for utility power, voltage regulation, on-battery, overload, replace battery and site
wiring fault conditions. Audible alarms provide notification of on-battery, low-battery and overload conditions.
Includes PowerAlert auto-shutdown and management software for complete monitoring, reporting and logging of
all site and UPS operational conditions, plus support for advanced configurations involving load-shedding,
remote-reboot and redundant dual-UPS applications. Internal batteries offer runtime of 11 minutes half load
(1440 watts) and 4 minutes at full load (2880 watts). Runtime is expandable with optional BP72V15-2U (limit 1),
BP72V28RT-3U (limit 4) and BP72V18-2US (limit 2) external battery packs. Supports installation in 4 post racks
with included accessories. 2 post rackmount, wallmount and tower stand accessories sold separate.
Features
3000VA / 3kVA 120V modular line interactive 2U rack / tower UPS for networks
1/5
Highlights
3kVA / 3000VA / 2880W line
interactive 2U rack/tower UPS,
Sine Wave
100/120/127V output, Corrects
brownouts and overvoltages 90
to 146V
0.96 Power Factor, Front panel
status LEDs
Hot-swappable internal UPS
power module
Extended runtime options up to
2880W
4 post compatible mounting
95% line-mode efficiency, 2
switched load banks
USB, RS232, EPO and slot for
SNMPWEBCARD option
120V NEMA L5-30P input, 6
NEMA 5-15/20R & 1 L5-30R
outlets
This product is ENERGY STAR
qualified for its ability to save
customers money while helping
to protect the environment
Applications
Distributed Server Rooms
Network Closets
Small Business Networks
Voice over IP (VoIP) Phone
Systems
Package Includes
UPS chassis pre-loaded with
hot-swappable UPS electronics
module and internal battery
module
PowerAlert Software with USB,
DB9 and EPO cabling
4 post rackmount installation
accessories
Owner's manual