SMART2200RM2UN Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine Wave UPS, SNMP, Webcard pre-installed, 2U Rack/Tower, LCD, USB, DB9 Serial

SmartPro 120V 2.2kVA 1.92kW Line-Interactive Sine
Wave UPS, SNMP, Webcard pre-installed, 2U
Rack/Tower, LCD, USB, DB9 Serial
MODEL NUMBER: SMART2200RM2UN
Highlights
2.2kVA / 2200VA / 1920W line
interactive 2U rack/tower UPS;
0.9 power factor
120V nominal output during
brownouts to 83V and
overvoltages to 145V
Interactive LCD provides UPS
status information and advanced
configuration options
Hot-swap batteries, 96%
efficiency, Sine wave output
USB, RS232 & EPO ports,
Pre-installed SNMPWEBCARD
interface
2 independently switchable
output load banks
NEMA 5-20P input; 4 NEMA
5-15R & 4 5-15/20R outlets
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
Applications
Distributed Server Rooms
Network Closets
Small Business Networks
Voice over IP (VoIP) Phone
Systems
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
Package Includes
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
SMART2200RM2UN UPS
interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network
system with Pre-installed
management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network
SNMPWEBCARD
interface. HID-compliant USB port enables integration with built-in power management and auto shutdown
PowerAlert Software with USB,
features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment
Serial & EPO cabling
load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete
4 post rackmount installation kit
cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select
Instruction manual
outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or
tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test.
Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART2200RM2UN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-20P input plug; 4 NEMA 5-15R & 4 NEMA 5-15/20R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
1/5