SMART1500_15 Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 120V 1.5kVA 980W Line-Interactive UPS,Tower, USB, DB9 Serial

SmartPro 120V 1.5kVA 980W Line-Interactive UPS,
Tower, USB, DB9 Serial
MODEL NUMBER: SMART1500
Highlights
1.5kVA / 1500VA line interactive
tower UPS system
120V output, Corrects brownouts
and overvoltages from 75V to
147V
Front panel status LEDs with
load and battery capacity level
display
USB & RS232 ports, 1 switched
load bank, Hot-swap batteries
NEMA 5-15P input, 6 5-15R
outlets
Package Includes
SMART1500 UPS System
USB and DB9 monitoring cables
PowerAlert unattended shutdown
Description
Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and
and UPS/Power monitoring
software
telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries
offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA/980 watt power handling capability supports a variety of networking,
telecom and various other application types, including the support of multiple network workstations. Includes a total of 6 outlets, 1 of which can be individually
powered on and off via software interface to selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for
more critical equipment. Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS
monitoring and unattended shutdown software with complete cabling. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery
power, battery low/replace, voltage regulation and load level. Wall mountable with optional UPSWM wallmount bracket. Network-grade AC surge suppression
protects equipment from damage and performance problems resulting from transient surges. Attractive, small-footprint tower housing uses less than 66 square
inches of floor or desktop space.
Features
1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types
Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime
Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures
Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an input voltage
range of 75-147V
Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment
or shed less significant loads to extend battery runtime for more critical equipment
Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS status and site power conditions
Communications ports enable safe unattended shutdown without data loss during extended power failures
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery
voltage and battery capacity
Communications ports support timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment
PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked
1/5