English
Language : 

SMART1500RMXLN Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, Extended Run, SNMP, Webcard pre-installed, 2U Rack/Tower, LCD, USB, DB9 Serial
SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine
Wave UPS, Extended Run, SNMP, Webcard
pre-installed, 2U Rack/Tower, LCD, USB, DB9 Serial
MODEL NUMBER: SMART1500RMXLN
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network
management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network
interface. HID-compliant USB port enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment
load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete
cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select
outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or
tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration
options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Highlights
1.5kVA / 1500VA / 1350 watt line
interactive 2U rack / tower UPS,
0.9 power factor
120V nominal output during
brownouts to 83V and
overvoltages to 145V
Interactive LCD provides UPS
status information and advanced
configuration options
USB, RS232, EPO and
Pre-installed SNMPWEBCARD
interface
Expandable runtime, Hot-swap
batteries, 95% efficiency, Sine
wave output
2 independently switchable
output load banks
NEMA 5-15P input, 8 NEMA
5-15R outlets
Applications
Distributed Server Rooms
Network Closets
Small Business Networks
Voice over IP (VoIP) Phone
Systems
Package Includes
SMART1500RMXLN UPS
system with Pre-installed
SNMPWEBCARD
PowerAlert software with USB,
Serial & EPO cabling
4 post installation kit
Owner's manual
Features
Tripp Lite SMART1500RMXLN line interactive 2U rack/tower UPS with 1500VA / 1.5kVA / 1350W capacity and extended runtime options
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5-15P input plug; 8 NEMA 5-15R output receptacles, Two independently switched output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
1/5