SMART1500RM2UN Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS, SNMP, Webcard pre-installed, 2U Rack-Tower, LCD, USB, DB9 Serial

SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine
Wave UPS, SNMP, Webcard pre-installed, 2U
Rack/Tower, LCD, USB, DB9 Serial
MODEL NUMBER: SMART1500RM2UN
Highlights
1.5kVA / 1500VA / 1350 watt line
interactive 2U rack/tower UPS,
Sine wave output
120V output, Corrects brownouts
and overvoltages from 83V to
147V
Interactive LCD provides UPS
status information and advanced
configuration options
USB, RS232, EPO and
PRE-INSTALLED
SNMPWEBCARD
2 switched output load banks,
13.45 in / 34.2 cm depth
NEMA 5-15P input; 8 NEMA
5-15R outlets
Applications
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating
Distributed Server Rooms
Network Closets
Small Business Networks
Voice over IP (VoIP) Phone
Systems
mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options.
Package Includes
Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected
SMART1500RM2UN UPS
equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating
System with Pre-installed
costs. Network management interfaces support communications via USB, RS-232 and Pre-installed
SNMPWEBCARD
SNMPWEBCARD network interface. HID-compliant USB port enables integration with built-in power
PowerAlert software with USB,
management and auto shutdown features of Windows and Mac OS X. Network communications ports enable
Serial & EPO cabling
detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert
4 post rackmount installation kit
monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote
Instruction manual
reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily
rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options.
Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART1500RM2UN line interactive 2U rack/tower UPS with 1500VA / 1.5kVA / 1350W capacity
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 147V
NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions
Internal batteries offer 13 minutes at 50% load (675W) and 4.5 minutes at 100% load (1350W)
Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment
1/5