SMART1050SLT_15 Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – SmartPro 100-110-120V 1.05kVA 650W Line-Interactive Sine Wave UPS, SNMP, Webcard,Tower, USB, DB9 Serial

SmartPro 100/110/120V 1.05kVA 650W
Line-Interactive Sine Wave UPS, SNMP, Webcard,
Tower, USB, DB9 Serial
MODEL NUMBER: SMART1050SLT
Highlights
1.05kVA / 1050VA line interactive
tower UPS, Sine wave output
100/110/120V nominal output
during brownouts and
overvoltages
USB, RS232 and slot for optional
SNMP/Web card
Detailed status LEDs, Single line
TEL / DSL surge suppression
NEMA 5-15P input, 8 NEMA
5-15R outlets
Package Includes
SMART1050SLT UPS System
PowerAlert Software CD
USB and serial cabling
Description
1050VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 100V, 110V
or 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations.
Line-interactive automatic voltage regulation (AVR) provides voltage boost during brownouts and voltage cut during overvoltages to maintain regulated 100V,
110V or 120V nominal output over an input voltage range of 95-145V. Features NEMA 5-15P input plug and 8 NEMA 5-15R output receptacles.
Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and
SNMPWEBCARD slot. HID-compliant USB port enables full integration with built-in power management and auto shutdown features of Windows and Mac OS
X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes
PowerAlert monitoring software and complete cabling. Features 3-stage metered current monitoring and battery charge status LEDs. Dataline surge
suppression for dialup, DSL or network Ethernet connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Field replaceable,
hot-swappable internal batteries.
Features
SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications
Line-interactive automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output during brownouts as low as 83V and
overvoltages to 145V
Enables continuous operation through blackouts, voltage fluctuations and surges
Line-interactive AVR provides a 14% boost during brownouts and a 12% voltage cut during overvoltages
Standard internal battery set offers 19 min. runtime at half load (325W) and 7 min. at full load (650W)
Space-saving upright tower format
Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot
HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number
of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery
1/5