SM3000RM2UNTAA Datasheet, PDF (1/5 Pages) Tripp Lite. All Rights Reserved – TAA-Compliant SmartPro 120V 3kVA 2.25kW Line-Interactive Sine Wave UPS, SNMP, Webcard,2U Rack-Tower, LCD, USB, DB9 Serial

TAA-Compliant SmartPro 120V 3kVA 2.25kW
Line-Interactive Sine Wave UPS, SNMP, Webcard,
2U Rack/Tower, LCD, USB, DB9 Serial
Highlights
Federal Trade Agreements Act /
TAA Compliant for GSA
Schedule purchases
MODEL NUMBER: SM3000RM2UNTAA
3kVA / 3000VA / 2250W line
interactive 2U rack/tower UPS
120V nominal output during
brownouts to 83V and
overvoltages to 145V
Interactive LCD, USB, RS232,
EPO and Pre-installed
SNMPWEBCARD interface
Hot-swap batteries, 98%
efficiency, Sine wave output, 2
switchable load banks
NEMA L5-30P input, 8 NEMA
5-15/20R & 1 L5-30R outlets
This product is ENERGY STAR
qualified for its ability to save
Description
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
customers money while helping
to protect the environment
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network
management interfaces support communications via USB, RS-232 and pre-installed SNMPWEBCARD network
Package Includes
SM3000RM2UNTAA UPS
System with Pre-installed
SNMPWEBCARD
PowerAlert Software with USB,
Serial & EPO cabling
4-post rackmount installation kit
Instruction manual
interface. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network
communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software
and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off
(EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel
and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases
Tripp Lite SM3000RM2UNTAA line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity (1600W maximum load with external battery packs)
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA L5-30P input plug; 8 NEMA 5-15/20R and 1 L5-30R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 98% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 10 minutes at 50% load (1125W) and 3.5 minutes at 100% load (2250W)
1/5