RELAYIOCARD Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – Programmable Relay I-O Card

Programmable Relay I/O Card
MODEL NUMBER: RELAYIOCARD
Description
Tripp Lite's RELAYIOCARD allows users to communicate UPS status and events via six configurable contact
closure outputs. Installs in any expansion slot-equipped SmartOnline and select SmartPro UPS systems*.
Enables monitoring and control of UPS conditions and events. Provides input signal relay contact to perform
remote UPS system shutdown or battery tests.
Highlights
Programmable, internal contact
closure management accessory
card
Six configurable relay output
contacts
Configurable input signal contact
Applications
Ideal solution for PCs, servers,
datacenters,
VoIP/telecom/industrial and other
mission-critical equipment that
requires power management,
monitoring and control.
Package Includes
RELAYIOCARD
Configuration cable
Faceplates
Owner's Manual
*NOTE: SmartPro UPS systems including SMART1050SLT, SMART1500SLT, SMART2200RMXL2U, SMX1050SLT, SMART3000SLT, SMART2200SLT,
SMART2200NAFTA, SMART2600RM2U, SMART3000RM2U, SMART1500CRMXL, SMART1500SLTXL, SMART750XLa, SMX2200XLRT2U,
SMX3000XLRT2U, and SMX3000XLRT2UA. Supported SmartPro systems must run UPS protocol 3008 or above. Works with all Tripp Lite Smart Online
series models (beginning with "SU"), does not work with SU10KRT3/1X, SU3000RTXL2U, and SUINT3000RTXL2U.
Features
Makes select Tripp Lite SmartPro or any SmartOnline UPS capable of providing contact closure output communications
6 relay output contacts are configurable for normal open or normal close signaling of UPS conditions
Configurable UPS conditions and events for each output relay contact
Configurable input signal relay contact to shutdown UPS or test battery
Specifications
OVERVIEW
Model Type
Accessories Type
WARRANTY
Hardware
Relay I/O Card
1/2