P167000 Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – HDMI over Dual Cat5-Cat6 Extender Wall Plate Kit with Transmitter and Receiver

HDMI over Dual Cat5/Cat6 Extender Wall Plate Kit
with Transmitter and Receiver
MODEL NUMBER: P167-000
Description
Tripp Lite's HDMI Over Dual Cat5 Extender Wallplate Kit is the perfect solution for those who need to extend a
HDMI signal over a long distance over two Cat5/6 cables.
When using 24Awg, Solid Wire Cat6 cable, a 1080p (24Hz) or 1080i (60Hz) signal can be extended up to 150
ft. from the source.
When using 24Awg, Solid Wire Cat6 cable, a 3D signal can be extended up to 100 ft.
When using 24Awg, Solid Wire Cat5 cable, a 1080p (24Hz) or 1080i (60Hz) signal can be extended up to 100
ft. from the source.
When using 24Awg, Solid Wire Cat5 cable, a 3D signal can be extended up to 50 ft.
Simply run two Cat5/6 cables between the local transmitter and remote receiver wallplates, and plug in standard
Tripp Lite HDMI cables to the HDMI source and the display. The Green LED on the remote receiver wallplate lets
you know that power from the source and monitor. When functioning properly, only the Green LED will be lit. If
the Red LED is illuminated, it means that the remote receiver is not receiving a functional signal from the source.
Highlights
Extends a 1080p (24Hz) or 1080i
(60Hz) signal up to 150 ft. using
24Awg, Solid Wire Cat6* cabling
(Tripp Lite N222-Series, or
N224-Series )
Extends a 3D signal up to 100 ft.
using 24Awg, Solid Wire Cat6
cabling
Supports 24-bit True Color (8-bits
per channel)
Supports DTS-HD, Dolby True
HD and 7.1 Channel Surround
Sound Audio
Supports HDCP, EDID and DDC
No external power required
*When using Cat5 cable, the
maximum extension distance is
reduced by 50 ft.
Applications
Home or Business theater
installations where the HDMI
display is more than 5 meters
from the source
Package Includes
Local Transmitter and Remote
Receiver Wallplates
110 Punchdown Tool
(x4) Wallplate Screws
Owner's Manual
The P167-000 comes with both local transmitter and remote receiver wallplates. DTS-HD, Dolby True HD and 7.1 Channel Surround Sound audio are
supported, and it is compliant with HDCP, EDID and DDC. 24-bit True Color (8-bits per channel) is supported. No external power is required. Compliant with
the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Features
Extends a 1080p (24Hz) or 1080i (60Hz) signal up to 150 ft. using 24Awg, Solid Wire Cat6* cabling (Tripp Lite N222-Series, or N224-Series )
Extends a 1080p (24Hz) or 1080i (60Hz) signal up to 100 ft. using 24Awg, Solid Wire Cat5 cabling
Extends a 3D signal up to 100 ft. using 24Awg, Solid Wire Cat6 cabling, or up to 50 ft. using 24Awg, Solid Wire Cat5 cabling
Supports DTS-HD, Dolby True HD and 7.1 Channel Surround Sound Audio
Supports HDCP, EDID and DDC
Supports 24-bit True Color (8-bits per channel)
1/2