B1401P0WP1 Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – DVI over Cat5-Cat6 Passive Extender, Wallplate Video Receiver, 1920x1080 at 60Hz

DVI over Cat5/Cat6 Passive Extender, Wallplate
Video Receiver, 1920x1080 at 60Hz
Highlights
For use with B140-002 ,
B140-002-DD, or B140-004
MODEL NUMBER: B140-1P0-WP-1
extender/splitter transmitter units
Supports DVI-D Single-Link video
resolutions up to 1920 x 1080 @
60Hz
Extends a 1920 x 1080 @ 60Hz
signal up to 50 ft., or a 1024 x
768 @ 60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
N202-Series, to achieve
maximum distance and resolution
Compatible with all operating
systems
Plug and play, no external power,
software or drivers required
Description
Compliant with the Federal Trade
The B140-1P0-WP-1 is a receiver wallplate that is used with the B140-002, B140-002-DD, and B140-004
Agreements Act (TAA) for GSA
extender/splitter transmitter units, transmitting a DVI-D Single-Link signal up to 100 ft. away using a single
Schedule purchases
Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp
Lite's N202-Series). The B140-1P0-WP-1 is compatible with all operating systems, and is plug and play, with no
external power, software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA
Schedule purchases.
Package Includes
B140-1P0-WP-1 DVI Over Cat5
Passive Extender/ Receiver
Remote Wallplate
Installation is simple. Connect a B140-002, B140-002-DD, or B140-004 transmitter (not included) to a DVI
source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0-WP-1 to a display using a
Wallplate screws
Owner's manual
Tripp Lite P561-Series DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the
transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to
100 ft..
Features
Transmit a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable
For use with B140-002, B140-002-DD, or B140-004 extender/splitter transmitter units
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
Extends a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
HDCP compatible
Compatible with all operating systems
Plug and play; no external power, software or drivers required
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
1/2