B1401P0 Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – DVI over Cat5-Cat6 Passive Extender, Video Receiver, 1920x1080 at 60Hz

DVI over Cat5/Cat6 Passive Extender, Video
Receiver, 1920x1080 at 60Hz
Highlights
For use with B140-002 or
B140-004 extender/splitter
MODEL NUMBER: B140-1P0
transmitter units
Supports DVI-D Single-Link video
resolutions up to 1920 x 1080 @
60Hz
Extends a 1920 x 1080 @ 60Hz
signal up to 50 ft., or a 1024 x
768 @ 60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
N202-Series, to achieve
maximum distance and resolution
Compatible with all operating
systems
Plug and play, no external power,
software or drivers required
Description
Compliant with the Federal Trade
The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units,
Agreements Act (TAA) for GSA
and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable. To achieve
Schedule purchases
maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite'sN202-Series). The
B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or
drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Package Includes
B140-1P0 DVI Over Cat5
Passive Extender Remote Unit
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp
Owner's manual
Lite P561-Series DVI cable (not included). Connect the B140-1P0's built-in DVI connector to a display. Finally,
the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft.
from the source, or a 1024 x 768 @ 60Hz signal up to 100 ft.
Features
Transmit a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable
For use with B140-002 or B140-004 extender/splitter transmitter units
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
Extends a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
HDCP compatible
Compatible with all operating systems
Plug and play; no external power, software or drivers required
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Specifications
1/2