B1401A0WP Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – DVI over Cat5-Cat6 Active Extender, Wallplate Remote Video Receiver, 1920x1080 at 60Hz

DVI over Cat5/Cat6 Active Extender, Wallplate
Remote Video Receiver, 1920x1080 at 60Hz
Highlights
For use with B140-002 or
B140-004 extender/splitter
MODEL NUMBER: B140-1A0-WP
transmitter units
Supports DVI-D Single-Link video
resolutions up to 1920 x 1080 @
60Hz
Extends a 1920 x 1080 @ 60Hz
signal up to 150 ft., or a 1024 x
768 @ 60Hz signal up to 200 ft.
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
N202-Series, to achieve
maximum distance and resolution
Can further expand the range
and number of monitors by
adding B140-110 repeaters
Compatible with all operating
Description
systems
The B140-1A0-WP is a receiver wallplate that is used with the B140-002 and B140-004 extender/splitter
Plug and play, no software or
transmitter units, and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch
drivers required
cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's
Features a built-in Equalization
N202-Series). The B140-1A0-WP is compatible with all operating systems, and is plug and play, with no software
control for adjustment of the
or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the
video image
Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp
Schedule purchases
Lite P561-Series DVI cable (not included). Connect the B140-1A0-WP to a display using a Tripp Lite P561-Series
DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a
single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source, or a 1024 x
768 @ 60Hz signal up to 200 ft.
Package Includes
B140-1A0-WP DVI Over Cat5
Active Extender Remote Wallplate
Wallplate mounting hardware
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote
units (three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4
displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can
be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can
be extended up to 175 ft.
Screwdriver for adjustment of
Equalization
110 punchdown tool
Wallplate screws
External power supply (Input:
100-240V, 50/60Hz, 0.5A Output:
Features
5V, 2A)
Transmit a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable
Owner's manual
For use with B140-002 or B140-004 extender/splitter transmitter units
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
Extends a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft.
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite's N202-Series, to achieve maximum distance and resolution
Features a built-in Equalization control for adjustment of the video image
1/2