B140110 Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – DVI over Cat5-Cat6 Extender, Box-Style Repeater, 1920x1080 at 60Hz

DVI over Cat5/Cat6 Extender, Box-Style Repeater,
1920x1080 at 60Hz
Highlights
Insert into your Tripp Lite
B140-Series DVI over Cat5
MODEL NUMBER: B140-110
installation to expand the range
and number of monitors (Cannot
be used with Passive extender
kits or Passive receiver units)
Supports DVI-D Single-Link video
resolutions up to 1920 x 1080 @
60Hz
Extends a 1920 x 1080 @ 60Hz
signal up to 125 ft., or a 1024 x
768 @ 60Hz signal up to 175 ft.
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
N202-Series, to achieve
maximum distance and resolution
Compatible with all operating
Description
systems
The B140-110 remote repeater unit can be added to your Tripp Lite B140-Series HDMI over Cat5 installation to
Plug and play, no software or
expand the range and number of monitors. It transmits a DVI-D Single-Link signal up to 175 ft. away using a
drivers required
single Cat5e/6 patch cable.To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable
Features a built-in Equalization
(Tripp Lite's N202-Series). The B140-110 is compatible with all operating systems, and is plug and play, with no
control for adjustment of the
software or drivers required. It features a built-in Equalization control for adjustment of the video image.
video image
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Installation is simple; just insert the B140-110 repeater into the middle of your installation (Cannot be used with
Schedule purchases
Passive extender kits or Passive receiver units). In the case of a B140-101X active extender kit, the built-in DVI
connector on the transmitter is connected to the DVI source. It is then connected via Cat5e/6 cable to the
B140-110, which is connected via Cat5e/6 cable to the B140-101X receiver unit. Finally, a monitor is connected
to both the repeater and receiver units using Tripp Lite P561-Series DVI cable (not included).
Package Includes
B140-110 Extender / Repeater
Unit
External Power Supply (Input:
Connect up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4
displays. (An active receiver should be the last unit in a chain)
A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel,
or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft.
100-240V, 50/60Hz, 0.5A Output:
5V, 2A)
Mounting Hardware
Screwdriver for Equalization
Adjustment
Features
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
Extends a 1920 x 1080 @ 60Hz signal up to 125 ft., or a 1024 x 768 @ 60Hz signal up to 175 ft.
Insert into your Tripp Lite B140-Series DVI over Cat5 installation to expand the range and number of monitors (Cannot be used with Passive extender kits
or Passive receiver units)
Add up to four remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active receiver should be the last unit
in a chain)
A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be
1/2