B140004 Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 4-Port DVI over Cat5-Cat6 Extender Splitter, Video Transmitter, 1920x1080 at 60Hz

4-Port DVI over Cat5/Cat6 Extender Splitter, Video
Transmitter, 1920x1080 at 60Hz
Highlights
Supports DVI-D Single-Link video
resolutions up to 1920 x 1080 @
MODEL NUMBER: B140-004
60Hz
For longer distances - Use a
B140-1A0 or B140-1A0-WP
active receiver unit to extend a
1920 x 1080 @ 60Hz signal up to
150 ft., or a 1024 x 768 @ 60Hz
signal up to 200 ft.
For shorter distances - Use a
B140-1P0 or B140-1P0-WP-1
passive receiver unit to extend a
1920 x 1080 @ 60Hz signal up to
50 ft., or a 1024 x 768 @ 60Hz
signal up to 100 ft.
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
Description
N202-Series, to achieve
The B140-004 transmits a DVI-D Single-Link signal to four monitors up to 200 ft. away using a single Cat5e/6
maximum distance and resolution
patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's
Can further expand the range
N202-Series). An additional DVI port is provided for the connection of a local monitor. This local DVI port can also
and number of monitors by
be used to daisychain up to 3 units together, allowing for the connection of up to 13 monitors (12 remote, 1
adding B140-110 repeaters
local). Mounting hardware is included that allows the unit to be rackmounted, wallmounted or pole mounted. In
Compatible with all operating
addition, up to three units can be mounted in 1U of rack space using a Tripp LiteB132-004-RB 19" rackmount
systems
bracket. The B140-004 is compatible with all operating systems, and is plug and play, with no software or drivers
Plug and play, no software or
required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
drivers required
Compliant with the Federal Trade
Installation is simple. Connect the B140-004 transmitter to a DVI source using a Tripp Lite P561-Series DVI
Agreements Act (TAA) for GSA
cable (not included). Connect a Tripp Lite B140-series receiver (not included) to each display using a Tripp Lite
Schedule purchases
P561-Series DVI cable (not included). Finally, each remote receiver is connected to an RJ45 port on the
B140-004 using a single Cat5e/6 cable.
Package Includes
B140-004 DVI Over Cat5
For longer extension distances, use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080
@ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft..
Extender/Splitter, 4-Port Local
Transmitter Unit
1 ft. DVI daisychain cable
For shorter extension distances, use a B140-1P0 or B140-1P0-WP-1 passive receiver unit to extend a 1920 x
1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft..
Mounting hardware
External power supply (Input:
100-240V, 50/60Hz, 0.5A Output:
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote
units (three repeaters and one active receiver) to each channel of the B140-004, for a total of 4 displays per
5V, 2A)
Owner's Manual
channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended
up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft.
Features
1/3