B140002DD Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – 2-Port Dual Display DVI over Cat5-Cat6 Extender Splitter, Video Transmitter, 1920x1080 at 60Hz

2-Port Dual Display DVI over Cat5/Cat6 Extender
Splitter, Video Transmitter, 1920x1080 at 60Hz
MODEL NUMBER: B140-002-DD
Highlights
Split and extend Dual DVI
signals from a computer to two
sets of Dual Displays
1920 x 1200 (60Hz) resolution up
to 150ft
Up to 4 displays per channel
when using repeaters
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Schedule purchases
Applications
Digital Signage utilizing DVI
source video and DVI Monitors
Package Includes
Description
Tripp Lite's B140-002-DD takes in two PC DVI source video signals, and splits each to two remote monitors.
Passive, non-powered Receivers allow distances up to 50ft @ 1920x1200 resolution, or 100ft @ 1024x768
resolution, over solid conductor Cat6 cable. Active, powered Receivers extend the distance to 150ft @
1920x1200, and 200ft @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained
(up to 3) on each channel, allowing four monitors per channel, by using Tripp Lite B140-110 Repeater/Extender.
Tripp Lite recommends Cat6 Solid Conductor patch cables for Digital Extenders (DVI/HDMI). Tripp Lite
B140-002-DD Extender / Splitter
Transmitter Unit
External Power Adapter ( Input:
100-240V, 50/60Hz, 0.5A Output:
5V, 2A )
Mounting Hardware
Owner's Manual
N202-series patch cables are designed specifically for these types of devices...pre-terminated, Solid Conductor Cat6 patch cables up to 200ft. Compliant with
the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Features
Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays
A B140-Series remote receiver is needed at each monitor
For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to extend a 1920 x 1200 @ 60Hz signal up to 150 ft. from the transmitter (or a
1024 x 768 @ 60Hz signal up to 200 ft. from the transmitter)
For shorter distances: Use a B140-1P0 or B140-1P0-WP passive receiver to extend a 1920 x 1200 @ 60Hz signal up to 50 ft. from the transmitter (or a
1024 x 768 @ 60Hz signal up to 100 ft. from the transmitter)
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series to achieve maximum distance and resolution
Further expand the range and number of monitors by adding B140-110 remote repeater units
Add up to three repeaters on each of the B140-002-DD channels, for a total of 4 displays per channel (An active receiver should be the last unit in a
channel)
A 1920 x 1200 @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1024 x 768 @ 60Hz signal)
DVI 1.0 compliant
HDCP compatible
Mounting hardware included that allows the unit to be wall-mounted, rackmounted, or pole mounted
Plug and play; no software or drivers required
Compatible with all operating systems
1/2