B132-008A-2 Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 8-Port VGA plus Audio over Cat5/Cat6 Extender/Splitter, Box-Style Transmitter w/EDID, 1920 x 1440 @ 60 Hz, Up to 1,000 ft.

8-Port VGA + Audio over Cat5/Cat6
Extender/Splitter, Box-Style Transmitter w/EDID,
1920 x 1440 @ 60 Hz, Up to 1,000 ft.
MODEL NUMBER: B132-008A-2
Description
The B132-008A-2 8-Port VGA + Audio over Cat5/Cat6 Extender/Splitter works with a B132-100A or
B132-100A-WP-1 remote receiver to split a VGA audio/video signal into nine separate signals—one local and
eight remote. It’s ideal for digital signs, trade shows and other applications where the video source is located
farther than conventional cables allow or that require multiple displays connected to one source.
Highlights
Requires Tripp Lite remote
receivers (sold separately)
Extends 1024 x 768 @ 60 Hz
audio/video signal up to 1,000 ft.
Extends 1920 x 1440 @ 60 Hz
audio/video signal up to 500 ft.
Daisy-chain up to 6 units to
extend signal to 49 displays
Plug and play—no software or
drivers to install
Package Includes
B132-008A-2 8-Port VGA +
Audio over Cat5/6 Extender
Splitter
External power supply (Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A)
VGA + audio daisy-chain cable,
1 ft.
Mounting hardware
Owner’s manual
The B132-008A-2 uses VGA cable(such as Tripp Lite’s P504-Series) to connect to the source and displays and Cat5e/6 cable to transmit to the remote
receivers. For best results, use 24 AWG solid-wire N022-01K-GY(Cat5e) or N222-01K-GY(Cat6) cable.
When used with Tripp Lite’s B132-Series active remote receivers, the B132-008A-2 can extend a 1920 x 1440(60 Hz) signal up to 500 feet and a 1024 x
768(60 Hz) signal up to 1,000 feet. By daisy-chaining up to six units, one audio/video source can transmit to as many as 49 displays—48 remote and one
local.
Add up to three B132-110A remote repeaters to each channel to fully extend the signal range or add more displays. You can extend a 1920 x 1440(60 Hz)
signal up to 500 feet or a 1024 x 768(60 Hz) signal up to 1,000 feet from the first repeater in the chain to the last receiver.
The B132-008A-2 also delivers high-quality audio and copies EDID information from a connected display to ensure optimal compatibility. Easy to set up with no
software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Transmits a Single High-Definition VGA + Audio Signal to 9 Sets of Displays/Speakers
Ideal for applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source
Splits one VGA + audio signal into 9 separate signals(8 remote, 1 local)
Tripp Lite B132-100A or B132-100A-WP-1 remote receiver required for each remote signal
1/3