B1264X4 Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 4x4 HDMI over Cat5-Cat6 Matrix Splitter Switch,Transmitter for Video and Audio, 1920x1200 1080p at 60Hz

4x4 HDMI over Cat5/Cat6 Matrix Splitter Switch,
Transmitter for Video and Audio, 1920x1200 1080p
at 60Hz
MODEL NUMBER: B126-4X4
Highlights
Routes HDMI sources over
Cat5e/6 cable to four different
monitors up to 175 ft. away
Add up to three repeaters on
each channel of the matrix
switch, for a total of 4 displays
per channel
Switch input sources via
Push-button, Remote, or RS232
serial
HDCP-compatible
Plug-and-play; no software or
drivers required
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Schedule purchases
Description
Tripp Lite’s B126-4X4 HDMI over Cat5/6 Matrix Splitter Switch and Transmitter Unit allows you to share
high-definition video and audio from four HDMI-enabled digital video components (e.g., DVR, Cable Box,
Blu-Ray, HD gaming consoles, etc.) to four different monitors. When used with Tripp Lite Active HDMI receivers,
it can extend a 1080P signal up to 125ft, and 1080i up to 175ft. By daisychaining three units together, you can
connect up to 4 monitors per video channel. The B126-4X4 is HDCP- and EDID-compatible and provides you
with a variety of installation options. Plug-and-play convenience makes for an easy, efficient setup and switching
between inputs is simple via pushbuttons, remote, or RS232 serial control options. Included with the product is a
5-ft. IR extension cable that allows you to extend the range in which the remote control can be used. It also
allows for the B126-4X4 to be discreetly placed out of view, while maintaining remote control functionality.
Package Includes
B126-4X4 Transmitter Unit
External Power Supply (Input:
100-240V, 50/60Hz, 0.5A Output
B126-2X2: 5V, 2A
3.5 mm to DB9 Adapter Cable (
serial )
Mounting Hardware
Remote Control
IR Extension Cable
Owner’s Manual
Features
Share multiple HDMI sources between multiple monitors
Allows any input to be routed to any output; or the same input to be routed to multiple outputs
Transmits the signal over one Cat5e/6 cable to a remote monitor up to 175 ft. away
A B126-Series remote receiver is needed at each monitor
For longer distances: Use a B126-1A0 or B126-1A0-WP-1 active remote receiver to extend a 1080p @ 60Hz signal up to 125 ft. from the transmitter (or a
1080i @ 60Hz signal up to 175 ft. from the transmitter)
For shorter distances: Use a B126-1P0 or B126-1P0-WP-1 passive remote receiver to extend a 1080p @ 60Hz signal up to 50 ft. from the transmitter (or a
1080i @ 60Hz signal up to 75 ft. from the transmitter)
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, to achieve maximum distance and resolution
Further expand the range and number of monitors by adding B126-110 remote repeater units
Add up to three repeaters on each channel of the matrix switch, for a total of 4 displays per channel (An active remote receiver should be the last unit in a
channel)
A 1080p @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1080i @60Hz signal)
1/3