B1261A0WP1 Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – HDMI over Cat5-Cat6 Active Extender, Wallplate Remote Receiver Unit for Video and Audio, 1920x1200 at 60Hz-1080p

HDMI over Cat5/Cat6 Active Extender, Wallplate
Remote Receiver Unit for Video and Audio,
1920x1200 at 60Hz/1080p
MODEL NUMBER: B126-1A0-WP-1
Description
The B126-1A0-WP-1 is a receiver unit that is used with the B126-002 and B126-004 transmitter units. It extends
a 1080p (60Hz) signal to a monitor up to 150 ft. away using Cat5e/6 cable. To achieve maximum distance and
resolution, use 24Awg Solid Wire Cat5e/6 cable. (Tripp Lite's N202-Series) It features a built-in Equalization
control for adjustment of the video image, and RJ45 jacks for easy connection with Cat5e/6 patch cable.
Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround
sound audio(7.1 channel surround sound signal will be Multi-Channel or PCM).
Installation is simple. Connect the transmitter unit to an HDMI source using a Tripp Lite P568-Series HDMI cable
(not included). Connect the receiver unit to a display using a Tripp Lite P568-Series HDMI cable (not included).
Finally, connect the receiver to the RJ45 port on the transmitter using a single Cat5e/6 cable.
A 1080p (60Hz) signal can be transmitted up to 150 ft.
A 1080i (60Hz) signal can be transmitted up to 200 ft.
A 3D signal can be transmitted up to 125 ft.
Highlights
For use with the B126-002 and
B126-004 transmitter units
Supports computer video
resolutions up to 1920 x 1200,
and HD resolutions up to 1080p
(60Hz)
HDCP and 3D compatible
Compatible with both stereo
audio and 7.1 channel surround
sound audio (7.1 channel
surround sound signal will be
Multi-Channel or PCM)
Supports 24-bit True Color (8-bits
per channel)
Can further expand the range
and number of monitors by
adding repeaters
Compliant with the Federal Trade
Agreements Act (TAA) for GSA
Schedule purchases
Package Includes
B126-1A0-WP-1 HDMI Over
Cat5 Active Extender Remote
Wallplate
Screwdriver for adjustment of
Equalization (Skew)
Wallplate mounting hardware
External power supply (Input:
100-240V, 50/60Hz, 0.5A Output:
5V, 2A)
Owner's manual
Further extend the signal range or add more displays by using a Tripp Lite B126-110 Remote Repeater unit:
Add up to three repeaters, with a receiver unit located at the end of the installation, for a total of 4 displays.
A 1080p (60Hz) signal can be extended up to 125 ft. for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 1080p (60Hz)
signal can be extended up to 500 ft..
A 1080i (60Hz) signal can be extended up to 175 ft. for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 1080i (60Hz)
signal can be extended up to 700 ft..
A 3D signal can be extended up to 100 ft. for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 3D signal can be extended
up to 400 ft..
1/3