B126-1A1-POC Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – HDMI over Cat5 Active Extender Kit, Power over Cable, Box-Style Transmitter/Receiver Audio/Video, 1080p, Up to 125 Ft.

HDMI over Cat5 Active Extender Kit, Power over
Cable, Box-Style Transmitter/Receiver Audio/Video,
1080p, Up to 125 Ft.
MODEL NUMBER: B126-1A1-POC
Description
The B126-1A1-POC HDMI over Cat5 Active Extender Kit includes a transmitter unit and a receiver unit that
work in tandem to extend an HDMI audio/video signal to a projector, monitor or television. The kit is ideal for
digital signs, trade shows, classrooms, churches, offices, retail settings and other applications where the source
is located farther than conventional cables allow.
HDMI cable (see Tripp Lite’s P569-Series) connects an optional local display and the audio/video source, such
as a Blu-ray™ player, to the transmitter’s HDMI ports and a remote display to the receiver. Cat5e/6/6a cable
connects the two units (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
Built-in Power over Cable (POC) technology powers the receiver over Cat5e/6/6a cable, so no external power
supply on the display side is needed.
Highlights
Built-in Power over Cable (POC)
technology powers the receiver
Supports high-definition video
resolutions up to 1080p (@ 60
Hz)
Supports stereo and 7.1-channel
surround sound audio
Built-in equalization control lets
you adjust monitor image
Plug and play—no software or
drivers to install
System Requirements
For international use, the
B110-INT power supply can be
purchased separately. It features
plugs for the U.K., Europe and
Australia.
Package Includes
Transmitter unit
Receiver unit
Screwdriver for adjusting
equalization
External power supply with
NEMA 1-15P plug and 5 ft. cord
(Input: 100–240V, 50/60 Hz,
0.5A; Output: 5V, 2A)
Mounting hardware
Owner’s manual
The B126-1A1-POC can extend a high-definition 1080p (@ 60 Hz) signal up to 125 feet. In addition to crystal-clear video, the B126-1A1-POC delivers full, rich
stereo and 7.1-channel surround sound (multi-channel or PCM). Built-in equalization control lets you fine-tune the image quality at the remote display. Supports
24-bit True Color (8 bits per channel) and HDCP. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included
hardware. Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Features
Extends High-Definition Signals
Extends a 1080p (@ 60 Hz) signal up to 125 ft.
Transmitter and receiver connect with one Cat5e/6/6a cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
Supports 24-bit True Color (8 bits per channel) and HDCP
Built-in equalization control lets you adjust the image on the local monitor
1/2