B126-1A1-IR Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – HDMI over Cat5/6 Active Extender Kit w/ IR Control, Box-Style Transmitter and Receiver, Video/Audio, 1080p, Up to 125-ft.

HDMI over Cat5/6 Active Extender Kit w/ IR Control,
Box-Style Transmitter & Receiver, Video/Audio,
1080p, Up to 125-ft.
MODEL NUMBER: B126-1A1-IR
Highlights
Supports high-definition video
resolutions up to 1080p (60 Hz)
Supports stereo and 7.1-channel
surround sound audio
Included IR cables allow
display-side control of video
source
Plug and play—no software or
drivers to install
Built-in equalization control lets
you adjust monitor image
System Requirements
For international use, the
B110-INT power supply,
featuring plugs for the U.K.,
Europe and Australia, can be
purchased separately
Description
Package Includes
The B126-1A1-IR HDMI over Cat5/6 Active Extender Kit includes a transmitter unit and a receiver unit that work
Transmitter unit
in tandem to extend HDMI audio/video and IR remote control signals to a projector, monitor or television. The kit
Receiver unit
is ideal for digital signs, trade shows, classrooms, churches, offices, retail settings and other applications where
IR-IN cable
the source is located farther than conventional cables allow.
IR-OUT cable
Screwdriver for adjusting
HDMI cable (see Tripp Lite’s P569-Series) connects a local display and the audio/video source to the transmitter
equalization
unit and a remote display to the receiver unit. Cat5e/6 cable connects the two units (for best results, use 24 AWG
(2) External power supplies with
solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series). Included IR-IN and IR-OUT cables allow you to
NEMA 1-15P plugs (Input:
control the video source, such as a Blu-ray™ player, while standing at the remote display.
100-240V, 50/60Hz, 0.5A;
Output: 5V, 2A)
The B126-1A1-IR can extend a 1080p (60 Hz) signal up to 125 feet. In addition to crystal-clear video, the
Mounting hardware
B126-1A1-IR delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio. Built-in
Owner’s manual
equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits
per channel) and HDCP. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Extends a 1080p (60 Hz) signal up to 125 ft.
IR functionality lets you control your Blu-ray player while standing at the remote display
Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio
Supports 24-bit True Color (8 bits per channel) and HDCP
Built-in equalization control lets you adjust the image on the local monitor
1/2