B126-1A1-INT Datasheet, PDF (1/2 Pages) Tripp Lite. All Rights Reserved – HDMI over Cat5/6 Active Extender Kit,Box-Style Transmitter/Receiver,Video/Audio,1080/60p,Intl Power Supply,Up to 200-ft.

HDMI over Cat5/6 Active Extender Kit,Box-Style
Transmitter/Receiver,Video/Audio,1080/60p,Intl
Power Supply,Up to 200-ft.
MODEL NUMBER: B126-1A1-INT
Description
The B126-1A1-INT HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that
work in tandem to extend an HDMI signal to a projector, monitor or television. The kit is ideal for digital signs,
trade shows, presentations, classrooms, churches, retail settings and other applications where the video source
is located farther than conventional cables allow.
Highlights
Supports high-definition video
resolutions up to 1080p (60 Hz)
Supports stereo and 7.1-channel
surround sound audio
Works with all operating systems
and HDMI video sources
Plug and play—no software or
drivers to install
Built-in equalization control lets
you adjust monitor image
Package Includes
Transmitter unit
Receiver unit
Screwdriver for adjusting
equalization
(2) External power supplies
w/CEE 7/16 Schuko, BS1363 UK
and AS2112 Australia plugs
(Input: 100–240V, 50/60 Hz,
0.5A; Output: 5V, 2A)
Mounting hardware
Owner’s manual
HDMI cable(see Tripp Lite’s P568-Series) connects a monitor and the audio/video source to the transmitter’s HDMI ports and another monitor to the receiver.
Cat5e/6 cable connects the two units(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
The B126-1A1-INT can extend a 1080i(60 Hz) signal up to 200 feet(61 m), a 1080p(60 Hz) signal up to 150 feet(45.7 m) and a 3D signal up to 125 feet(38.1
m). You can also connect up to threeB126-110 remote repeaters in the chain(using Cat5e/6 cable) for a total of five HDMI displays and full signal extension of
700 feet/213.4 meters(1080i), 500 feet/152.4 meters(1080p) or 400 feet/121.9 meters(3D).
In addition to high-definition video, the B126-1A1-INT delivers full, rich stereo and 7.1-channel surround sound(multi-channel or PCM) audio. Built-in
equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color(8 bits per channel) and HDCP. Easy to set up with
no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Extends a 1080i(60 Hz) signal up to 200 ft.(61 m), a 1080p(60 Hz) signal up to 150 ft.(45.7 m) and a 3D signal up to 125 ft.(38.1 m)
Connect up to 3 B126-110 remote repeaters between the transmitter and receiver for maximum signal range of 700 ft./213 m(1080i), 500 ft./152.4
m(1080p) and 400 ft./121.9 m(3D)
Transmitter and receiver connect with one Cat5e/6 cable(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
Supports stereo and 7.1-channel surround sound(multi-channel or PCM) audio
Supports 24-bit True Color(8 bits per channel) and HDCP
1/2