B126-1A0-INT Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – HDMI over Cat5/6 Active Extender, Box-Style Receiver for Video/Audio, 1080p 60 Hz w/ Intl. Power Supply, Up to 200-ft.

HDMI over Cat5/6 Active Extender, Box-Style
Receiver for Video/Audio, 1080p @ 60 Hz w/ Intl.
Power Supply, Up to 200-ft.
MODEL NUMBER: B126-1A0-INT
Description
The B126-1A0-INT HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite’s B126-002 or B126-004
transmitter to extend an HDMI signal to multiple projectors, monitors or televisions in a chain. It’s ideal for digital
signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video
source is located farther than conventional cables allow or that require multiple displays connected to one
source.
Highlights
Works in tandem with B126-002
or B126-004 transmitter unit
Supports high-definition video
resolutions up to 1080p(60 Hz)
Supports stereo and 7.1-channel
surround sound audio
Works with all operating systems
and HDMI video sources
Plug and play—no software or
drivers to install
Package Includes
B126-1A0-INT HDMI over
Cat5/Cat6 Active Remote
Receiver
Screwdriver for adjusting
equalization
External power supply w/CEE
7/16 Schuko, BS1363 UK and
AS2112 Australia plugs (Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A)
Mounting hardware
Owner’s manual
The receiver uses HDMI cable(see Tripp Lite’s P568-Series) to connect to the monitor and Cat5e/6 cable to receive the signal from the transmitter or a remote
repeater in the chain(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
The B126-1A0-INT can extend a 1080i(60 Hz) signal up to 200 feet(61 m), a 1080p(60 Hz) signal up to 150 feet(45.7 m) and a 3D signal up to 125 feet(38.1
m). You can connect up to threeB126-110 remote repeaters in the chain for a total of four HDMI displays and full signal extension of 700 feet/213.4
meters(1080i), 500 feet/152.4 meters(1080p) or 400 feet/121.9 meters(3D).
In addition to high-definition video, the B126-1A0-INT delivers full, rich stereo and 7.1-channel surround sound(multi-channel or PCM) audio when paired with a
B126-Series transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color(8 bits per channel)
and HDCP.
Features
Extends High-Definition Signals
Works in tandem with Tripp Lite’s B126-002 or B126-004 transmitter unit
Extends a 1080i(60 Hz) signal up to 200 ft.(61 m), a 1080p(60 Hz) signal up to 150 ft.(45.7 m) and a 3D signal up to 125 ft.(38.1 m)
Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 ft./213 m(1080i), 500 ft./152.4 m(1080p) and 400 ft./121.9
m(3D)
Connects to previous link in the chain with one Cat5e/6 cable(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
1/3