B126-004-INT Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – 4-Port HDMI over Cat5/6 Extender/Splitter, Box-Style Transmitter, Video/Audio, 1080/60p, Intl Power Supply, Up to 200-ft

4-Port HDMI over Cat5/6 Extender/Splitter, Box-Style
Transmitter, Video/Audio, 1080/60p, Intl Power
Supply, Up to 200-ft
MODEL NUMBER: B126-004-INT
Description
The B126-004-INT 4-Port HDMI over Cat5/Cat6 Extender/Splitter works with Tripp Lite B126-Series remote
receivers to split a single HDMI audio/video signal into five separate signals—one local and four remote. It’s ideal
for digital signs, trade shows, presentations, retail settings and other applications where the video source is
located farther than conventional cables allow or that require multiple displays connected to one source.
Highlights
Perfect for digital signs, trade
shows and classrooms
Can daisy-chain up to 3 units to
extend signal to 13 monitors
Works with all operating systems
and HDMI video sources
Supports stereo and 7.1-channel
surround sound audio
Plug and play—no software or
drivers to install
Package Includes
B126-004-INT 4-Port HDMI over
Cat5/Cat6 Extender/Splitter
HDMI daisy-chain cable, 12 in.
(30.5 cm)
External power supply w/CEE
7/16 Schuko, BS1363 UK and
AS2112 Australia plugs (Input:
100–240V, 50/60 Hz, 0.5A;
Output: 5V, 2A)
Mounting hardware
Owner’s manual
The B126-004-INT uses HDMI cable(see Tripp Lite’s P568-Series) to connect to the source and the local monitor and Cat5e/6 cable to transmit to the remote
monitors(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series).
When used with Tripp Lite’s B126-1A0 or B126-1A0-WP-1 active remote receivers, the B126-004-INT can extend a 1080i(60 Hz) signal up to 200 feet(61 m), a
1080p signal(60 Hz) up to 150 feet(45.7 m) and a 3D signal up to 125 feet(38.1 m). With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can
extend a 1080i(60 Hz) signal up to 100 feet(30.5 m) and a 1080p(60 Hz) signal up to 50 feet(15.2 m).
By daisy-chaining up to three B126-004-INT units, one video source can transmit to as many as 13 monitors—one local and 12 remote. Add up to three
B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.
Easy to set up with no software or drivers to install, the unit mounts to a wall, rack or pole using the included hardware.
Features
Extends High-Definition Signals
Extends a 1080i(60 Hz) signal up to 175 ft.(53.3 m), a 1080p(60 Hz) signal up to 125 ft.(38.1 m) and a 3D signal up to 100 ft.(30.5 m) with each optional
Tripp LiteB126-110 remote repeater
Extends a 1080i(60 Hz) signal up to 200 ft.(61 m), a 1080p(60 Hz) signal up to 150 ft.(45.7 m) and a 3D signal up to 125 ft.(38.1 m) with Tripp Lite
B126-1A0 or B126-1A0-WP-1 active remote receiver
Extends a 1080i(60 Hz) signal up to 100 ft.(30.5 m) and a 1080p(60 Hz) signal up to 50 ft.(15.2 m) with Tripp Lite B126-1P0 or B126-1P0-WP-1 passive
1/3