B078-001-USB Datasheet, PDF (1/3 Pages) Tripp Lite. All Rights Reserved – KVM Switch Accessories - NetCommander USB Server Interface Module

KVM Switch Accessories - NetCommander USB
Server Interface Module
MODEL NUMBER: B078-001-USB
Description
The Tripp Lite NetCommander USB Server Interface Module connects to the HD15 port and USB port on a
computer/server, and converts them to a single RJ45 connector. Ordinary Cat5e patch cables can then be used
to connect the server to the switch ports on a Tripp Lite B072-Series NetCommander Cat5 KVM switch. Use of
Cat5e cables frees up space in the installation that would ordinarily be filled by traditional, thicker KVM cables.
Features
Eliminates the need for thicker, heavier KVM cables
Compact, lightweight design
Plug and Play; no software required
No power supply required
Allows a Server/CPU to be located up to 35ft away from the KVM switch
Specifications
Highlights
Needed to connect a USB Server
to a B072-Series
NetCommander KVM switch via
Cat5e cable
Easy to install; no software
needed
No power supply required
Allows a recommended
maximum distance of 35ft from
KVM to computer/server via
Cat5e cable
Compact and lightweight design
System Requirements
Server or CPU with a HD15
port and a USB port
A B072-Series NetCommander
Cat5 KVM Switch
Cat5e/6 cable; up to 35ft
Package Includes
1 USB Server Interface Module
OVERVIEW
Application
Model Type
CONNECTIONS
Connector A
Connects a USB computer/server to a B072-Series Cat5 KVM Switch
Interface Modules
RJ45 (FEMALE)
1/2