APSINT2424 Datasheet, PDF (1/4 Pages) Tripp Lite. All Rights Reserved – PowerVerter APS INT 2400W 24VDC 230V

PowerVerter APS INT 2400W 24VDC 230V
Inverter/Charger with Auto Transfer Switching,
Hardwired
MODEL NUMBER: APSINT2424
Highlights
24V DC or 230V AC input; 230V,
50 Hz output (hardwired)
2400 watts continuous, 3600
watts OverPower™ and 4800
watts DoubleBoost™ inverter
output (see specifications)
3 stage, 30 amp selectable
wet/dry cell battery charger
Auto Transfer Switching option
for battery backup / UPS
operation
Reliability enhanced
large-transformer design with
protected DC and AC wiring
terminals
Applications
Versatile inverter/charger system
Description
with auto-transfer switching
serves as an automotive inverter
Tripp Lite's APSINT2434 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging
for RVs, over-the-road trucking,
system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to
conversion vans, marine
2400 watts of continuous 230V AC power from any 24V battery or automotive DC source. When hardwire AC
environments and fleet service
input is energized, commercial power passes through to connected equipment and the battery set is recharged
vehicles; a standalone alternative
via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and voltage
power source for off-grid,
fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high
alternative energy or export
current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for
applications and as an
recommendations). Passes sine wave utility or generator power during battery charging and UPS line power
uninterruptible power supply
operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
(UPS) for items compatible with a
transformer design, with frequency control powers resistive electronic loads or large inductive motors,
20 millisecond transfer time.
compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch
NOTE: For sump pump
with full status LEDs provides remote power inverter on/off switching and continuous status information
applications, Tripp Lite
(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries
recommends its "UT" Utility Truck
connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for
Inverter/Chargers.
wet/gel battery types and selectable line to battery power transfer voltages.
Package Includes
Features
APSINT2424 Inverter/Charger
Supports 230V AC output from a 230V AC line power source or 12V DC battery source
Instruction manual with warranty
20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts
information
and voltage fluctuations for equipment compatible with a one cycle transfer time
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions.
3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
1/4