TK2350 Datasheet, PDF (1/36 Pages) Tripath Technology Inc. – STEREO 300W (4 OHM ) CLASS-T DIGITAL AUDIO AMPLIFIER DRIVER USING DIGITAL POWER PROCESSINGTM TECHNOLOGY

Tripath Technology, Inc. - Technical Information
TK2350
STEREO 300W (4Ω) CLASS-T DIGITAL AUDIO AMPLIFIER DRIVER
USING DIGITAL POWER PROCESSING^TM TECHNOLOGY
Technical Information
Revision 1.5 – September 2003
GENERAL DESCRIPTION
The TK2350 (TC2001/TP2350B chipset) is a two-channel, 300W (4Ω) per channel Amplifier Driver that uses
Tripath’s proprietary Digital Power Processing (DPP^TM) technology. Class-T amplifiers offer both the audio
fidelity of Class-AB and the power efficiency of Class-D amplifiers.
Applications
Audio/Video Amplifiers & Receivers
Pro-audio Amplifiers
Automobile Power Amplifiers
Subwoofer Amplifiers
Benefits
Reduced system cost with smaller/less
expensive power supply and heat sink
Signal fidelity equal to high quality Class-AB
amplifiers
High dynamic range compatible with digital
media such as CD and DVD
Features
Class-T architecture
Pin compatible with Tripath TK2150
Proprietary Digital Power Processing technology
“Audiophile” Sound Quality
0.02% THD+N @ 50W, 8Ω
0.03% IHF-IM @ 30W, 8Ω
High Efficiency
95% @ 150W @ 8Ω
90% @ 275W @ 4Ω
Supports wide range of output power levels
Up to 300W/channel (4Ω), single-ended
outputs
Up to 1000W (4Ω), bridged outputs
Output over-current protection
Over- and under-voltage protection
Over-temperature protection
Typical Performance for TK2350
10
f = 1kHz
5 BBM = 80nS
BW = 22Hz - 22kHz
2
1
0.5
0.2
0.1
0.05
0.02
0.01
1
2
THD+N versus Output Power versus Supply Voltage
R_L = 4Ω
39V
45V _54V
5
10
20
50
100
200
500
Output Power (W)
1 of 1
TK2350, Rev 1.5/09.03