USB-2-485 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – USB to RS485 Interface Converter with Virtual COM Port Driver

BUS INTERFACE CONVERTERS
10 mm
INTERFACES
USB-2-485
USB to RS485
Interface Converter
with Virtual COM Port Driver
INFO The USB-2-485 device is a low-cost interface converter that sup-
plies a simple-to-use RS485 interface to a PC with an USB port.
The USB-2-485 device can be used erverywhere where an RS485
interface is needed, since it does not require special software. It
can be operated with most simple terminal programes support-
ing the serial interface. The software supplied with this product
can be used with every version of the Windows operating
system that supports USB (Windows 98, Windows ME, Windows
2000, Windows XP). The USB-2-485 device can be connected to
USB 1.1 or USB 2.0 hosts and supports the full bitrate of 12MBit/s.
It is fully powered by the bus, so no extra power supply is
needed.
MAIN CHARACTERISTICS
• U SB host interface
connection to USB 1.1 or USB 2.0
hosts possible (a cable is included)
USB full speed device (12MBit/s)
bus powered (no extra power supply
needed)
• RS485
half duplex communication mode
supports all standard baud rates
up to 3Mb/s supported
• Software
virtual COM port driver included
can be used with standard terminal
programs, e.g. Hyperterminal
• Ro HS compliant
USB-2-
RS485
USB
RS-485
ORDER CODE
TMC USB-2-485
DESCRIPTION
USB interface converter (with USB Cable)
www.trinamic.com – for detailed information and datasheets
64