TMCM-303 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 3-Axis Controller/Driver 1.1A/34V

MODULES FOR STEPPER MOTORS
10 mm
MODULES
TMCM-303
3-Axis
Controller / Driver
1.1A / 34V
INFO The TMCM-303 is a compact and versatile triple axis 2-phase
stepper motor controller and driver module. It provides a com-
plete motion control solution at a very small size for embedded
applications. Using the integrated additional I/Os it even can
do complete system control applications. The board can be con-
nected to a baseboard or customized electronics with a pin con-
nector. The TMCM-303 comes with the PC based software devel-
opment environment TMCL-IDE. Using predefined TMCL (Trinamic
Motion Control Language) high level commands like „move to
position“ or „constant rotation“ rapid and fast development of
motion control applications is guaranteed. Host communication
is possible via the serial UART interface (e.g. using a RS-232 or
RS-485 level shifter) or via CAN. All time critical operations, e.g.
ramp calculation are performed on board. A user TMCL program
can be stored in the on board EEPROM for stand-alone opera-
tion. The firmware of the module can be updated via the serial
interface. With the optional stallGuard™ feature it is possible to
detect overload and stall of the motor.
TMCM-303
16
I/Os
RS-232
or
RS-485
5V DC
7..34V DC
CAN
UART
TMCL
Memory
programmable
Motion
Controller
with TMC428
6
Driver
TMC246
Driver
TMC246
Driver
TMC246
Step
Motor
Step
Motor
Step
Motor
REF-Switches
MAIN CHARACTERISTICS
ELECTRICAL • up to 1.1A coil current RMS (1.5A peak)
DATA
• 7V to 34V motor supply voltage
• 5V DC logic supply voltage
SUPPORTED • two-phase bipolar motors
MOTORS
with 0.3A to 1.1A coil current
INTERFACE • UART (RS-232, RS-485)
or CAN 2.0b host interface
• inputs for reference and stop switches
• general purpose analog and digital I/Os
FEATURES • up to 16 times microstepping
• memory for 2048 TMCL commands
• automatic ramp generation in hardware
• on the fly alteration of motion parameters
(e.g. position, velocity, acceleration)
• stallGuard™ option for sensorless
motor stall detection
• full step frequencies up to 20kHz
• dynamic current control
• TRINAMIC driver technology:
no heatsink required
SOFTWARE • stand-alone operation using TMCL
or remote controlled operation
• PC-based application development
software TMCL-IDE included
OTHER • 68 pin connector carries all signals
• RoHS compliant
• size: 80 x 50 mm²
ORDER CODE
TMCM-303/SG (-option)
Related products:
OPTIONS
H
V
DESCRIPTION
3-axis controller / driver 1.1A / 34V with stallGuard™
BB-303, BB-323-03, TMCM-EVAL
Horizontal pin connector (standard)
Vertical pin connector (on request)
www.trinamic.com – for detailed information and datasheets
37