TMCM-142 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 1-Axis Controller/Driver 5A/75V with Encoder Interface

MODULES FOR STEPPER MOTORS
10 mm
MODULES
TMCM-142
1-Axis
Controller / Driver
5A / 75V
with Encoder Interface
INFO The TMCM-142 is a high-performance single axis 2-phase stepper
motor controller and driver with encoder feedback. It offers an
aluminum U-shape profile for quick and robust mounting. The
integrated TMC457 motion controller provides superior perfor-
mance with regards to microstepping (up-to 1024), maximum
velocity (integrated chopSync™ avoiding resonances), S-shape
or linear ramp calculation in realtime and encoder feedback sup-
port (closing the loop in hardware with easyPID™ regulator).
The driver stage supports motors with up-to 5A RMS coil current
and offers exceptional low power dissipation. Its interface add-
on board concept allows customer specific interface / connector
solutions. The TMCM-142 comes with the PC based software
development environment TMCL-IDE for the Trinamic Motion
Control Language (TMCL). Using predefined TMCL high level
commands like „move to position“ or „constant rotation“ rapid
and fast development of motion control applications is guaran-
teed. The TMCL program can be stored in the on-board EEPROM
for stand-alone operation.
Switch
RS422 RS232 RS485 USB
TMCM-IF
add-on board
REF-Switches
ABN
CAN
USB RS232 RS422
progammable
Motion
Controller
I/Os
ARM7
TMC 457
5V Power Supply
18… 78.5V DC
TMCL
Memory
TMCM-142
Encoder
Interface
high power
Driver
TMC239
MOSFET
Driver
Stage
Encoder
Step
Motor
MAIN CHARACTERISTICS
ELECTRICAL • up to 5A coil current RMS
DATA
• 24V to 75V DC supply voltage
SUPPORTED • two-phase bipolar stepper motors with
MOTORS
1A to 5A coil current
• incremental encoder (2 or 3 channel, differ-
ential, open-collector or single ended)
INTERFACE
(WITH ADD
ON-BOARD)
• RS232, RS485, RS422, USB or CAN 2.0b host
• inputs for reference and stop switches
(optically isolated)
• general purpose analog and digital I/Os
FEATURES • high precision and high repeatability with
encoder feedback and easyPID™ regulator
• chopSync™ for high velocities
• up-to 1024 times microstepping
• memory for 2048 TMCL commands
• motion profile calculation in hardware (RT)
• trapezoid or S-shaped acceleration ramps
• on the fly alteration of motion parameters
• TRINAMIC driver technology:
low power dissipation, no heatsink required
SOFTWARE • stand-alone operation using TMCL or
remote controlled operation
• PC-based application development
software TMCL-IDE included
• ready for CANopen
OTHER • RoHS compliant
• size: 76 x 70 x 33 mm³
ORDER CODE
DESCRIPTION
TMCM-142-IF (-opt.) 1-axis controller / driver 5A / 75V with interface add-on board (standard)
TMCM-142 (-option) 1-axis controller / driver 5A / 75V (on request)
OPTIONS
TMCL
CANopen
TMCL firmware (standard)
CANopen firmware (on request)
www.trinamic.com – for detailed information and datasheets
35