TMCM-090 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 1-Axis Piezo Motor Driver 3kHz/48V

MODULES FOR PIEZO MOTORS
10 mm
MODULES
TMCM-090
1-Axis
Piezo Motor Driver
3kHz / 48V
INFO The TMCM-090 is a compact piezo motor driver module for high
precision and highly dynamic piezo axis. It is specially designed
for four phase piezo motors, like the PIEZO MOTOR „Piezo Legs“.
It can be combined with the driver-less modules TMCM-301 or
TMCM-302 or with any step/direction controller. The TMCM-323
can be added for encoder feedback. Its small size makes it an
optimum solution for integration on any user board. The board
can be connected to a baseboard or customized electronics with
a pin connector. Applications are optical and analytical instru-
ments. Its high microstep resolution leads to a linear motor
resolution of about 2nm per microstep.
MAIN CHARACTERISTICS
ELECTRICAL • up to 3 kHz cont. fullstepping rate
DATA
(400nF load)
• 48V DC motor supply voltage
• 5V DC logic supply voltage
SUPPORTED • Piezo Legs four phase motor
MOTORS
INTERFACE • Step / Direction input (TTL/CMOS signal)
• SPI™ interface
FEATURES • up to 2048 times microstepping
for highest motor precision
• supports four different waveforms:
omega564, sine1s85, Rhomb, Rhomb F
• low EME design for the ease of use
OTHER • the module is pin compatible to the
TMCM-035, and can be used on a
baseboard designed for the TMCM-035
• 68 pin connector carries all signals
• RoHS compliant
• Size: 80 x 50 mm² (credit card)
SPI
Step/Dir
5V DC
48V DC
Sequencer
TMCM-090
high power
Driver
Analog
Power
Stage
Piezo LEGS
ORDER CODE
TMCM-090 (-option)
Related products:
OPTIONS
H
V
DESCRIPTION
1-axis piezo motor driver 3kHz / 48V
BB-035, BB-301, BB-100
Horizontal pin connector (standard)
Vertical pin connector (on request)
www.trinamic.com – for detailed information and datasheets
48