TMCM-078 Datasheet, PDF (1/1 Pages) TRINAMIC Motion Control GmbH & Co. KG. – 1-Axis Step/Direction Driver 7A/75V

MODULES FOR STEPPER MOTORS
10 mm
MODULES
TMCM-078
1-Axis
Step / Direction Driver
7A / 75V
INFO The TMCM-078 is a high power single axis step / direction step-
per motor driver. The TMCM-078 can be operated with supply
voltages of up to 75V and up to 7A RMS (9.8A peak) motor coil
currents. All major parameters can be set via DIP switches.
Up to 256 micro-steps are supported for either high accuracy
or high speed. The system features sensorless stall detection
(stallGuard™). The module is fully protected and comes with a
stand-alone reference search feature. The housing is based on
an aluminium plate which is used as a heatsink.
All inputs and outputs are accessible either via screw connec-
tors or by high density (2 mm) JST connectors.
Step/Dir
TMCM-078
RS-485
Opto
isolation
programmable
Motion
Controller
15..75V DC
5V Power Supply
Driver
TMC249
MOSFET
Driver
Stage
Step
Motor
MAIN CHARACTERISTICS
ELECTRICAL • up to 7A RMS coil current (9.8A peak)
DATA
• supply voltage 15V to 75V DC
SUPPORTED • two-phase bipolar stepper motor
MOTORS
with 0.7A to 7A RMS coil current
INTERFACE • differential Step / Direction input
• driver disable input
• input for reference switches
• general purpose input / output
FEATURES • optically isolated inputs
for Step, Direction and Disable
• up to 256 micro-step resolution (adjustable)
• adjustable standby current
• stallGuard™ for reference search
• full protection / diagnostics
• RS485 host interface for optional use
OTHER • pluggable screw terminal connectors for all
signals with high density JST alternative
• robust aluminum housing
• RoHS compliant
• size: 145 x 96 x 33 mm
ORDER CODE
TMCM-078
Related products:
DESCRIPTION
1-axis step / direction driver module 75V, 7A
USB-2-485
www.trinamic.com – for detailed information and datasheets
27